TBS Crossfire TX

The TBS Crossfire TX is a leading long-range transmitter designed for FPV enthusiasts who demand reliability and performance in their flying experiences. Featuring an advanced digital signal transmission system, the Crossfire TX provides unmatched range and signal stability, ensuring a robust connection between your transmitter and drone even in challenging environments. This powerful transmitter operates on the 868MHz or 915MHz frequency bands, allowing for extensive customization to suit various flying conditions and legal requirements.



Built with a user-friendly interface and an ergonomic design, the TBS Crossfire TX is easy to set up and operate, making it suitable for both beginners and experienced pilots. The transmitter is compatible with a wide range of receivers, providing versatility in your FPV setup. Whether you're racing, freestyling, or exploring the skies, the TBS Crossfire TX delivers superior performance and reliability, giving you the confidence to push your limits.

A NEW ERA OF CONNECTIVITY


The TBS CROSSFIRE is a long range R/C link based on the newest RF technology, capable of self-healing two-way communications and range beyond comprehension. With a sensitivity of -130dB, full RF-side diveristy, tiny receivers for FPV quads, the TBS CROSSFIRE contains the most modern technology to provide a superior long range control link.

Remote control links, however, are tasked with much more than range. Latency, telemetry, robustness against interference, connectivity with smart devices, ease of use and the overall finish are too often sacrificed for that last bit of range. The Crossfire comes with plenty of range, and uses that margin for additional functionality and reliability. A bright future for FPV lies ahead :)

DEVELOPED BY EXPERTS


Team BlackSheep has been notorious for long range records, close-to-ground proximity flying in the Alps and deep urban operations. During our numerous missions all around the globe we have gathered a list of requirements, and have found that no existing system can cover them all. So we set on a long and painful path to develop a RC link system entirely from scratch, put it through its paces for over a year to ensure top-notch reliability and state-of-the-art functionality.

Through the OLED Display on the transmitter, you can monitor the real-time location of your drone (TBS GPS or BlackBox with DJI Naza or APM-based GPS required).  The up- and downlink status provide a feeling of safety, the configuration options through the OLED display do away with any PC-based configuration tools. The pulsing LED relays your link budget and link health in colorized form (green = keep going, orange = turn around). In case of a crash, the location of the drone is visible on the OLED as well. The built in battery on the receiver turns it into a beacon automatically - and it will continue to transmit its last known location until the battery runs out.

IT JUST WORKS


Apart from unparalelled range, the thing that we are most proud about on the TBS CROSSFIRE is that it just works. In the past, our question always was "could our R/C link keep up?". With the TBS CROSSFIRE comes peace of mind. But don't take our word for it. All leading drone racing organizers require pilots to fly the TBS Crossfire. All top drone racers fly the TBS Crossfire. The furthest long range missions are flown with TBS Crossfire. This is the long range link that everyone has been waiting for!

TELEMETRY / CRSF


As a modern R/C link, it has telemetry built in. Two-way communication opens up new possibilities. From streaming MAVLink to you smart device, to updating your firmware, setting your video transmitter channel or adjusting flight control parameters such as PIDs. Adaptive bandwidth controls the speed of transmission or optimizes for ultimate range. CRSF is a proprietary TBS communication protocol between the Crossfire and R/C and Flight Control. It provides ultra-low latency with incredible bandwidth (3x faster, 6x more data than any comparable protocol!). With such tight integration, the TBS Crossfire is the logical choice for anyone flying Betaflight, KiSS or ArduPilot/Pixhawk platforms.

DOWNLOADS

FEATURES:

  • Long range, adaptive and robust remote control system for your aircraft
  • Immune to on-board noise
  • Two-way communication link with real-time link vitals and telemetry
  • Self-healing & frequency hopping (DSSS, FHSS)
  • Adaptive bandwidth control and range optimization
  • Serial Modem capable of transmitting MAVLink or other serial protocols (up & downlink)
  • RX beacon mode to recover your downed aircraft
  • Super easy binding and configuration via built-in display
  • Low latency, 150Hz update rate (3x faster than typical RC links) control for perfect immersive feeling
  • Two receiver models: 8ch Diversity Rx, 4ch PPM/SBUS Mini-receiver (4g weight!)
  • 8 or 12ch output via PPM/SBUS/CRSF on both receivers
  • Ability to fly with multiple friends at the same time (10 or more)
  • Selectable RF power from 10mW to 2W (local restrictions apply)
  • Dedicated head-tracking input option for full FPV immersion
  • Transmitter LED shows link health, OLED display for built in configuration
  • Short-Range mobile connectivity telemetry output for smartphone apps
  • Fully configurable by OpenTX and TBS TANGO remote using CRSF protocol
  • CRSF protocol interface to Betaflight, Kiss and Raceflight FCs ( lower latency, higher update rate, telemetry support )
  • Expansion port for future feature support
  • Micro-receiver for smaller drones. Smaller than you think!
  • Software updates via RF Link

TECHNICAL SPECIFICATIONS:

  • Frequency Bands: 868MHz (EU, Russia) / 915MHz (USA, Asia, Australia)
  • Input Voltage: 3.5 - 13V
  • Power consumption: 1.1W (@10mW) - 3.2W (@2000mW)
  • Dimensions: 55 x 89 x 15 mm
  • Weight: 76g

PACKAGE INCLUDES

  • TBS Crossfire Transmitter
  • TBS Crossfire JR Adapter
  • TBS Crossfire Stock Tx Antenna V2
  • Crossfire Futaba cable
  • Crossfire Graupner / Spektrum cable
  • Crossfire PWM Pigtail
  • Crossfire JST to XT30 cable

Customer Reviews

Based on 3 reviews
100%
(3)
0%
(0)
0%
(0)
0%
(0)
0%
(0)
J
J. M.
Best TX ever made

I really enjoy using the Crossfire for my long distance flights. This transmitter combined with the Diamond Antenna gives me way more range than I will ever need. I just flew my T1 Ranger out more than 2 1/2 miles and the RSSI stayed at 100% the whole flight. I have the Max signal strength set at 500mw with Dynamic power on. Occasionally the signal strength will go to 100mw but mostly stays at 25mw. I don't have to worry about loosing signal to the receiver, it stays connected even when my video signal starts to get weak. Now when I fly long distance the battery, and video signal are the only limiting factors. LOL

N
Nico Martindale
Life changing!

This is a game changer! I have yet to fly somewhere that I have dropped signal! I will never be going back to anything else.

R
Robert Slyter

Can't hold wrong with TBS

Related Products

View more