Brandan FPVhas formulated the perfect solution to your environmental worries!
TheBrandan FPV Worry Free Waterproof Coating Kithas everything you need for application and is designed to protect your FPV electronics from moisture exposure! Flying in fair weather is always preferred but sometimes the perfect circumstance isn't always reality. Ease your worries and apply Worry Free conformal coating to your FPV electronics to ensure your flights are never interrupted by inclement weather or high humidity!
VIDEO: How To Apply FPV Worry Free
Features
Protects FPV Electronics from Moisture
Waterproofing Made Simple
Easy Application
APPLICATION INSTRUCTIONS
Tear down all parts so you can easily put Worry-Free FPV on, no need to unsolder.
Clean up all surfaces with an air blower, brush, or cloth to avoid dust, oil, moisture, or any other things that cover them.
Apply Worry-Free FPV to all components such as flight controller, VTX, and camera boards evenly and slowly. Let dry for 15-20 minutes and then continue to add additional coats as needed to ensure all desired surfaces are covered.
To coat the FPV camera you can put Worry-Free FPV on the camera connector, on-camera case, especially on the connection between the case, and the FPV camera focus ring
Do not coat wiring harness connectors.
Do one side at a time or wait until Worry-Free FPV is dry then move to the other side.
IMPORTANT TIPS
The application of this product does not guarantee your electronics will be waterproof. Please always allow time to dry (usually 24h) and test to ensure all desired surfaces are covered.
If you cover chips such as a barometer you may lose the functionality of the chip.
At first I have a relatively low flight time with my Meteor65 Pro. Then I decided to lighten the Pro. I think because the motors (smaller) have a lower current draw the Nitro Nector Golds are really shining. It is at least comparable to a lot of other packs I have. So the capacity is definitely great, just don’t use them in a high current environment and they will work very well.
For tiny whoop racing, I prefer this motor with the hummingbird guts (AIO camera and canopy) on the 65pro frame with 4-blade 35mm props. Close to 20g, phenomenal run time.
Some people at the racetrack (and CIOTTI) call this an "old school" motor.
I usually make my own 180 degree power pigtail, but BETAFPV designed the perfect pigtail for a fair price, had to buy them... I usually don't like BETAFPV BT2.0 pigtail wires, the silicon is high quality, but where you solder the wire right next to the wire is where it always breaks, I don't expect this to change :-(
I would recommend these excellent BT2.0 Cable Pigtails :-))))