SPI ELRS receiver (Binding instruction: power on the drone, push the bind button under the flight controller to get into bind mode. If you get the firmware version of 4.3.1, it should comes with ELRS2.5 Version. If you get the firmware version of 4.4.x it will be ELRS3.0. Please make sure your remote controller ELRS version are match with the Receiver.
This drone has been carefully crafted using only newbeedrone parts. It is important to note that any use of non-compatible parts from other brands may result in technical difficulties. Additionally, should you choose to modify the drone, it is crucial that you assume full responsibility for any resulting issues. It is not advisable to proceed with modifications without the necessary knowledge and expertise. We appreciate your understanding and cooperation in ensuring the safe operation of the drone.
New to FPV but I really like the micro's. This quad has quality thru out. From the motors to the board. If you didn't buy one you're missing out.
A
Anonymous
Fun Drone
nice price which made the decision pretty easy. a lot of fun to bash around
R
RileyFPV
Decent but could be better
While this tiny whoop may not be the lightest or have the most powerful video transmitter, it has been a blast learning the basics of flying and a few tricks as a beginner. With that being said, I’ve ran into a few problems. The strength of the solder joints on the motor wires is questionable, one came undone in a small crash. Another aggravating issue was that the battery leads on my quad were very short, they needed to be bent extremely bent in order to connect the battery. After a few short weeks the ground cable came completely disconnected at the connector head. These problems were fixed relatively easily but it’s something to keep in mind if you’re getting started in the hobby. I broke the canopy in one mounting place on the third day of owning the drone but it has been holding up and the frame seems very resilient to damage.
R
Roberto Camacho
Great racing whoop
I've had all the hummingbird And so far this is the best one yet!!! Love how it flies and how responsive it is.
A
Anonymous
Great first whoop
This is a great whoop to learn how to fly. Its very powerful and quick. The only issues were that the motor wire detached, but an easy solder fix. And that after landing on the canopy the camera lens detached from the sensor, so its being held on by hotglue but the image quality never recovered.
Still building it, but this sucker gets five stars for completeness. Seems to have a double supply of screws and standoffs, plus it comes with a full set of TPU bits—antenna mount, xt30 mount, a little sled for the receiver, and shoes—that you won’t get from cncdrones.
These batteries might actually be worth it in terms of dollars per flight time! They last over five minutes when my old lower end batteries last three minutes, and they’ve even lasted for seven on a freestyle quad in a tight environment. Plus it’s always fun to have a battery that can actually kind of handle full throttle for extended periods!
I tried to be cheap and find crappy clones of all these tools... it's not cheaper, it's very expensive to buy just a prop wrench, just a m3 nylock wrench and buying hex drivers and wire strippers. It totalled me 90$. This ethix toolkit was cheaper and got me exactly what I wanted and needed for my drone kit
