NewBeeDrone is dedicated to make the best FPV drone products in the industry.
Our flagship propellers - the Azi Props started as a NewBeeLabs project that successfully turned into production for consumers.
Over the span of 9 months, we have worked intensively with our NewBeeLabs partner to make the most well rounded micro propellers to improve flight time, speed, and control. After dozens of iteration and months of testing, we were able to design these light weight propellers that are perfect for both freestyle and racing.
Without any compromise at top-end, bottom-end, or efficiency, we believe our Azi propellers will become the new industry standard.
Some notable characteristics of the Azi props include:
Linear feel for accurate throttle control
Faster spool up times giving you more "pop"
Grip in the corners to find and hold the best line possible
Higher top end speed to kill the straights
Bottom end grunt to give you that recovery you crave
Efficient without having to sacrifice bottom end grunt or top end speed (read magic)
These are great. Bought a bunch because I didn’t know how quickly I would burn through them with my ArcoBee65. So far only used up one pack.
A
Alex Cortes
Best props for tiny whoops
I love using the azi props on all my micro builds, I love the way they fly doing some freestyle.
J
James Bradford
NewBeeDrone Azi (Tri Blade) Micro Propellers 31mm - 1.0mm Shaft (Set of 4)
They have been great. Plenty of power for my beebrain. they are not indestructible, but with the ducts, they last.
J
Jeff D
WAS excited. Didn't stay that way though...
Let me start by saying NBD and their shipping was great. On point and abide and beyond as usual. My problem lies specifically with the props. I have ruined multiple 702 and 802 motors using these props, simply because of how hard they are to put on and remove. The mounting hole is ridiculously tight. I understand loose props - BAD. But, c'mon guys, these things are a joke to put on/remove.
On top of the broken motors, if you want to change one of these props without destroying it... Good luck. You're a Good amongst men if you can 'pull that one off.' pun indeed intended.
C
Coby Parsons
1mm Shaft hole is to tight
Great props but the 1mm Shaft isn't big enough for 1mm
I wanted something that was packable and easy to take with. Got tired of needing to pack a large radio, neck straps, and all of the needed padding to just fly my whoops when traveling. This radio is so much easier to throw in a bag and fly with. Coming from a Taranis X9D plus, the pocket is a lot lighter and easier to carry. Gimbals feel good and it’s comfortable when holding. It’s the first small radio I tried that I was able to feel comfortable with. Compared to Zorro and TX12, the Pocket feels a lot more balanced. Highly recommended as a travel or only radio if you want something light and easy to carry.
Some downsides:
1. Arming/disarming takes a bit to get used to since there are not traditional switches.
2. Even though there are 5 position switches for the trims, you can’t use the center press as a switch like Jumper
3. The case is glossy, I wish it was more textured like DJI radios for better grip.
4. The speaker makes a buzzing sound when powered on and sometimes switching things in menus.
Otherwise great radio that’s easy to fly and live with.
I flew drones yrs ago. I dabbled in all types of drones from tiny whoops to 4 inch freestyle/acro quads to cine dji. Good beginner starter bundle. Definitely worth the $.
![[pre-order] HDZero Freestyle V2 Kit](http://newbeedrone.com/cdn/shop/files/all_{width}x.png?v=1694509846)
![[pre-order] HDZero Freestyle V2 VTX](http://newbeedrone.com/cdn/shop/files/a_{width}x.png?v=1694509689)
![[pre-order] BETAFPV 2S Battery Charger and Voltage Tester BT3.0---9/30](http://newbeedrone.com/cdn/shop/files/BT3.0_720x_ba2e2544-fb0f-4599-a3ab-4c3e1209d0d4_{width}x.webp?v=1694154470)
