This is a Flywoo another smallest but most spowerfu l GOKU 405 Nano flight controller packed with features including a barometer, 16MB blackbox, 6 complete hardware serial ports, I2C functionality and WS2812 LEDs on each corner.
It is specifically designed to be pin mounted to the Goku BS13A / 35A 4in1 16x16 ESCs but can also be soldered via pads. The programmable WS2812 LED on each corner provide low profile lighting for this tiny FC
Features
F405 BGA MCU
Barometer
5V 2A BEC
Black Box 16MB
6 UARTS
WS2812LED
Specifications
GOKU GN405 Nano16X16 FC
MCU: STM32F405 BGA
IMU: ICM42688 \ MPU6000
Barometer:BMP280
input voltage ： 2-6S
Onboard LED：WS2812*4
6 hardware UARTS (UART1,2,3,4,5,6)
Supports serial receivers (SBUS, iBus, Spektrum, Crossfire) only.
PPM and PWM receivers are not supported.
Onbord 16Mbytes for Blackbox logging
5V Power Out: 2.0A max
3.3V Power Out: 0.5A max
Dimensions: 22x22mm
Mounting Holes: Standard 16/16mm square to center of holes
they have a nice grippy slightly rounded top for thumbers, which I have always been, but they are also scalloped with 2 different radius for hybrid pinchers which I have wanted to use but never felt comfortable with until now. I think I am switching thanks to these sticks. fits my AG01 perfectly.
I bought it for longer flights with 6s motors, so that I can have more control and smoothness for cinematic stuff. I haven’t tested it to it’s limits because I don’t have any 5” quads with motors over 1960kv so I can’t take advantage of the C-rating the way a 4S motor would, but it has held up for me.
Stout boy. Lots of room for electronics and room for the new elrs gemini chip. I look forward to building this out and sending her Loooooong Range on MountaineerFPV on Youtube
![[pre-order] SpeedyBee 5.8 GHz Antenna V2 SMA](http://newbeedrone.com/cdn/shop/files/1000-9__56467_{width}x.jpg?v=1695705569)
![[pre-order] HDZero Freestyle V2 Kit](http://newbeedrone.com/cdn/shop/files/all_{width}x.png?v=1694509846)
