Updated version with 1303 motors.


Have you been waiting for a full HD 2" rig? If so wait no more, this setup is using the Caddx Vista and the new Caddx Nebula cam in a new 2inch whoop frame. They also did some tuning and tried to find the optimal ratio between weight and power. This is what they came up with to combine flight time efficiency with sufficient power.


  • 84.5 grams (without battery)
  • Butter smooth XING-E 1303 more torque and efficiency with longer flight times compared to 1105 motors
  • Ducts to protect the sensitive environment or yourself
  • Pre-tuned with smooth cinematic settings
  • iFlight Sigma 5.8G light antenna upgrade
  • iFlight Sigma 900mhz light micro antenna upgrade

Alpha A85 HD BNF Specs:

  • SucceX-D 20A F4 Whoop AIO
  • Motor: XING-E 1303 5000KV
  • Wheelbase: 85mm
  • Body size: 125*125mm
  • Ducted propeller size: 2 inch
  • FC pattern: 25.5*25.5mm
  • FPV cam spacing: 14mm
  • Weight: 84.5g (without battery)
  • Flight time: 5-7 min cruising (4S 450mAh)


This BNF comes pre-built and setup with all necessary parameters to bind-and-fly. We also added a basic filter and PID tuning as well as some more secret Betaflight sauce to enhance the flight experience.

Reflashed your drone but didn't backup the setup? Messed up the whole tune and want our factory tune back?
No need to worry! All Factory Dumps and Wiring Diagrams can be found on our Google Drive: LINK

Alpha A85 HD Quad BNF Included Components and Parts

  • Prebuilt and tested Quadcopter
  • 1x Alpha 85mm Frame
  • 1x Caddx Nebula Digital HD System Kit
  • 1x iFlight Sigma 5.8g light antenna
  • 2 sets HQ 2 inch 4-blades (Set of 4 - Color May Vary)
  • 1x iFlight Lipo Strap

FC // SucceX-D 20A F4 Whoop AIO

  • SucceX-D 20A F4 Whoop AIO
  • Size 30.5*30.5mm
  • Mounting pattern 25.5*25.5mm/3mm
  • Connector Micro-USB
  • MCU STM32F411
  • Gyro MPU6000
  • Blackbox 8MB
  • BEC output 5V 2A/10V 2A
  • INA pad UART2 (nR2)¬†
  • Barometer no
  • Constant current 20A 25A Burst
  • Input 2-5S
  • Current sensor yes
  • BLHeli / BLHeli-S
  • Telemetry no
  • Target IFLIGHT_F411_PRO
  • Config IFLIGHT_F411_PRO.config
  • ESC Firmware G-H-30 BLS

Additional Suggested Parts

  • DJI HD FPV Goggles
  • Radio Controller
  • Battery 4S 450mAh


The DJI Remote Controller is recommended for beginners since you won't need to set up another receiver, but it is also optional in this BNF drone because it is NOT required in order to use the FPV system. If you don't choose to use the DJI Remote Controller, you can choose a receiver option for your transmitter and then bind to your own radio as usual.

Customer Reviews

Based on 2 reviews
Jason James
Great first Quad if you have DJI goggles and Transmitter

Make sure you have the FPV specific DJI assistant 2 software and activate and update the firmware for the CADDX VISTA. Charge a 4S 450mA and bind to goggles first then to the radio. Angle mode is great for the first few flights.

Joseph Terry

Loving it so far. First time FPV pilot and after a couple of days I’m already doing flips and roll in acro mode.