NewBeeDrone Invisi360 Cinewhoop Frame Kit Support DJI O3 NOW!
The Invisi360 is a versatile, safe, and high-performance platform for the Insta360 ONE R/RS 360 Camera. With this drone, you'll be able to capture complete 360 degree footage all in one go!
We've designed the frame to be only 0.85 inches thick to allow the camera to stitch together images from two cameras with no blind spots. Included are camera lens covers that protect the lens from scratching.
A unique design feature is that there isn't one large battery compartment throwing off the center of gravity. The Invisi360 has mounting slots for two separate batteries that connects together to power the drone. This leads to a perfectly balanced CG and flexibility in flying either 4s or 6s.
In indoor situations, flying 4s mutes the power and makes it easier to control altitude. When flying outdoors with higher speeds, 6s provides the necessary power to perform maneuvers and chase subjects.
Recommend to use 6s, use two 3s batteries in series. Use batteries that are similar dimensions as our suggested battery.
Recommended Build
AIO Flight Contoller: NewBeeDrone Galaxy255 AIO
Motors: NewBeeDrone Flow 2004 2450KV Motors
We designed the NewBeeDrone Flow 2004 2450KV Motors to balance efficiency, power, and feel. Inside of each motor are two NSK / NMB 730ZZ Ball Bearings which are known as the best in the business for smoothness and durability. The shiny finished bell was CNC machined out of 7075 aluminum alloy and meticulously quality checked for perfection.
FPV Gear
We recommend using DJI Gear with this drone as it is easiest to capture footage with HD FPV. However, analog systems with micro cameras (19x19mm) will fit the frame with some washers which are normally included with cameras.
Right away, this is the best 65mm Whoop I know. Not even close.
I ordered two, one is more or less stock, just the PEEK motor screws and V3 cockroach. The second is upgraded to 0702 27000kV but will go back because I like the 25000kV more because of smoother throttle response and perfect betaflight tune.
Now the but:
1. On both quads I had to replace the BeeEye for a spare one because both are out of focus.
2. the yellow props were way too loose and very brittle. I lost two on my maiden. Black, blue and red are very tight (too tight for such a fragile prop) but if you get them on without bending them, they will last.
3. why does the quad not come with the lighter frame right away?
4. PH2.0…. You know the drill.
On that price point, even after the frame and PEEK upgrade I can forgive these quality issues. Especially considering the great tune and quality FC and motors. But be sure to order a replacement cam and props right away.
This was kind of a late night lark. I'd seen this upgrade for the Mk3 for a while and pondered whether it was a gimmick or not, and I'm pleased to say it's a genuinely good upgrade. It has reduced the noise of my Mk3 considerably. I haven't noted any significant increase in print quality, but the old drone of the bed is gone and that's completely worth it.
