The Invisi360 is a versatile, safe, and high-performance platform for the Insta360 ONE R 360 Camera. With this drone, you'll be able to capture complete 360 degree footage all in one go!
We've designed the frame to be only 0.85 inches thick to allow the camera to stitch together images from two cameras with no blind spots. Included are camera lens covers that protect the lens from scratching.
A unique design feature is that there isn't one large battery compartment throwing off the center of gravity. The Invisi360 has mounting slots for two separate batteries that connects together to power the drone. This leads to a perfectly balanced CG and flexibility in flying either 4s or 6s.
In indoor situations, flying 4s mutes the power and makes it easier to control altitude. When flying outdoors with higher speeds, 6s provides the necessary power to perform maneuvers and chase subjects.
To run 4s, use two 4s batteries in parallel. To use 6s, use two 3s batteries in series. Use batteries that are similar dimensions as our suggested battery.
Recommended Build
Stack: NewBeeDrone Infinity200 Stack
The Infinity200 Stack earned it's current rating of 45A per motor through strenuous simulations and high-power drone test flights. A large metal heatsink covers the ESC's MOSFETs for heat dissipation as well as debris, dust, and water protection.
Motors: NewBeeDrone Flow 2004 1750KV Motors
We designed the NewBeeDrone Flow 2004 Motor to balance efficiency, power, and feel. Inside of each motor are two NSK / NMB 730ZZ Ball Bearings which are known as the best in the business for smoothness and durability. The shiny finished bell was CNC machined out of 7075 aluminum alloy and meticulously quality checked for perfection.
FPV Gear
We recommend using DJI Gear with this drone as it is easiest to capture footage with HD FPV. However, analog systems with micro cameras (19x19mm) will fit the frame with some washers which are normally included with cameras.
It has a rather bad tune and no ability to tune it but it is flyable so I guess it does its job. Good luck growing with it though. I would recommend a nicer micro than this one.
Although this frame has a slight “slammed” profile, it still fits a full size f7 stack. My new favorite frame tbh! Black box shows very little motor noise or frame resonance. It’s GOOD!
UserGot the Axisflying Z20 and one Motor burned out on the first day. They seem to be quite fragile.
For the Frame itself it is quite hard to work on. As of now I remove two of the motors to be able to access the flight controller, air unit etc.. There are more robust and better built 2'' drones available