NewBeeDrone AcroBee75 HD O3

Introducing the AcroBee75 HD O3 BNF - a compact powerhouse. It's the pioneer whoop featuring G4 flight controller and built-in ELRS2.4 receiver, effortlessly compatible with Dshot600 and bi-directional Dshot. As the tiniest and lightest HD whoop with a complete DJI O3 unit available, it boasts remarkable agility and an impressive flight time of nearly 3.5 minutes. Our expert tuning ensures seamless indoor filming in self-level and acro modes. To optimize performance and visuals, turn on DJI RockSteady via goggle settings. Note that this model is not suitable for outdoor or windy conditions.



Warning: This drone has been carefully crafted using only newbeedrone parts. It is important to note that any use of non-compatible parts from other brands may result in technical difficulties. Additionally, should you choose to modify the drone, it is crucial that you assume full responsibility for any resulting issues. It is not advisable to proceed with modifications without the necessary knowledge and expertise. We appreciate your understanding and cooperation in ensuring the safe operation of the drone.

*Note: For outdoor flying, RockSteady is required in order to get the best picture quality(On DJI goggle Menu). The PID tune are base on the current setup. If you change any setting on the drone and it is acting weird, please flash the newest firmware.

 




Specifications:

Recommended battery:

 

BeeBrain BLV4 HD G4 Flight Controller ELRS2.4G Specifications:

  • MCU: STM32G474
  • ESC Firmware: Z-H-40 - Bluejay 0.19.2 48kHz.
  • ESC Specifications: 1 channel 20A ESC
  • Receiver: NBD ExpressLRS 3.0 Diversity (non-SPl)
  • Receiver Antenna: 1x BeeT-Antenna 1x 2.4G receiver antenna
  • Flight Controller Weight:7.4g (including antenna and XT30 Battery connector)
  • Flight Controller Size: Outer dimensions :29 x 29 x 7.6 mm
  • Flight Controller Holes: 25.5 x 25.5 mm
  • Battery Input: 1-2S
  • BEC:10V 2A for DJI O3 (under 2S power only)
  • BEC5V 2A
  • UART1: Free
  • UART2: TX & RX for EXPRESSLRS 3.0 receiver
  • UART3: Free
  • UART4: Free
  • Flight time with Tattu 450mAh 2S battery is 3:00min (at 7v)

 

Includes:

 

 

Video:










Downloads:

BeeBrain BLV4 HD Betaflight 4.4.0 firmware with tune

Newest Firmware

3D file


Customer Reviews

Based on 8 reviews
88%
(7)
13%
(1)
0%
(0)
0%
(0)
0%
(0)
C
Coker

It was super easy to switch to using my DJI goggles and controller, just looked up a few vids and I was up and going within an hour.
Having a blast flying him around my office!

D
Duane Degn
Fun But Loud

I really like this quad but it is noisy. I don't think there's a way around this amount of noisy with so much weight and with such small props.
I personally like to add small switches to all my O3 aircraft so the unit doesn't overheat while I get things set up. I added a small switch to my AcroBee75 so I can power on the quad without powering on the 03. I think this mod makes using O3 aircraft easier.

M
Mostafa Bakir
Great flyer.

Only a few flights. Smooth.

K
Kenneth Butler
Amazing

Folks over at NewBeeDrone smashing it outta the park again! How?! I keep asking myself, how does an O3 air unit fit on this?!

O
One Toyota
Flys like a dream funnest drone I have

This drone flys like a dream but one down fall the 03 cage unit very fragile first crash it broke and my 03 unit fell out and the camera wire got caught in the impeller and got cut now I need a new cage and wire for the camera 😔 other than that fun drone to have in the collection