0 Cart
Added to Cart
    You have items in your cart
    You have 1 item in your cart
    Check Out Continue Shopping

    Check out our Badger spare parts here!

    The Badger

    One of the oldest and most loved memes on the internet

    The humble badger is the namesake of Armattan's newest flagship.  With a design based off of the Marmotte frame, the Badger updates it with removable arms: carefully designed to ensure a rock-solid construction.

    The Cage

    This is the newest revision of Armattan's titanium cage; the same as on the Marmotte. And just in case you haven't heard what the perks of this cage are compared to any other, we'll run through them quickly here.

    - Independent HD camera tilt means there's no need to deal with foam wedges for the front or back of your recording camera.
    - A wide range of FPV cam tilt options.  From 10 degrees to way too much.
    - 1mm FPV-cam savers: these are designed to bend so your camera won't break.
    - A minimized weight due to a state of the art, 6-axis milling process.

    And the best part?  All of these perks come on top of the firm mount and incredible protection that you've come to expect from an Armattan product.

    The Arms

    Since having removable arms is the major draw for this release, we wanted to specifically mention how they work.  The arms mount up with two bolts and two sunk-nuts each.  The sunk-nuts go straight into the 4mm baseplate, so there's no need to worry about delamination.  When installed, the arms meet in the center of the baseplate, further locking down the construction.  We're providing you with a remarkably solid, precise product, and we know that you will have full confidence in this frame.

    Other Details

    This frame comes with tons of other bells and whistles.  As you've come to expect, an extended-aluminum rear provides a protected mount for your VTX antenna no matter whether you use a TBS, SMA, or U.FL style connector.  The frame maintains compatibility with 5.5 inch props for those of you who like to ride the line, and the long body means you can more easily fit an HD camera and a bigger lipo, even with high cam tilt. The FC can mount up on either the 30.5mm or 20mm options, and there are even 20mm rear provisions as well for a VTX or any other board.

    Add the differences in carbon and the extra hardware, and you're probably expecting this frame to be considerably heavier than the fixed arm version (the Marmotte).  Well due to our experience in design and some clever optimization, we've kept the difference down to 15g.  You can thank us later. 


    2x Camera-cage brackets
    2x Camera-cage anchors

    10x 4mm M3 iron bolts
    14x 6mm M3 12.9 grade steel bolts
    8x 8mm M3 12.9 grade steel bolts
    10x 10mm M3 12.9 grade steel bolts
    12x Sunknuts
    4x 16mm M3 iron bolts 
    6x 2.5mm M2 cuphead iron bolts

    1x 23mm front standoff
    2x tail posts
    2x camera savers

    4x 6mm M3 standoffs
    4x nuts
    2x M6 nylon washers

    Carbon Fiber:
    1x 2mm Top (LiPo) plate 
    1x 1.5mm HD Cam plate
    1x 4mm Main plate
    2x Antenna mount plates (TBS and SMA)

    1x Lipo strap

    1x LiPo foam pad
    1x HD camera foam pad
    4x Dog-bone landing pads
    1x Antenna mount
    1x SMA grommet 
    1x Diamond-coated steel file
    1x Build instructions