Specification:
Model: Caddx Ant lite
Image Sensor: 1/3" CMOS Sensor
Horizontal Resolution: 1200 TVL
TV System: NTSC and PAL(switchable)
MENU: Support
IMAGE: 4:3/16:9
Synchronization: Internal
Electronic Shutter: PAL: 1/50~100,000; NTSC: 1/60~100,000
S/N Ratio: >52dB (AGC OFF)
Video Output: CVBS
Lens: 1.8mm/F2.5
Min. llumination: 0.001Lux
Auto Gain Control: YES
BLC: YES
WDR: Global WDR
DNR: 3D DNR
Dimensions: 14* 14mm
Wide Power Input: DC 3.7-18V
Work Temperature: -20°C~+60C
Work Humidity: 20%~80%
Weight: 1.7 g (N.W.)

Package included:
1 x Caddxfpv Ant Lite FPV Camera FPVCycle Edition

    Customer Reviews

    Based on 16 reviews
    88%
    (14)
    6%
    (1)
    0%
    (0)
    0%
    (0)
    6%
    (1)
    J
    JoeE
    works finr

    works fine. decent video. prefer the lower cost of the beeeye since I'm rough on my whoops, but this has a little better video

    S
    SittingDuck
    Nice camera and fits Goober canopy perfectly

    Added this to my SavageBee frame, Happy Model X12 AIO ELRS FC, Goober canopy. Fits together nicely. Unfortunately video randomly cuts out when the 1S battery falls below 3.5v during flight (camera is rated 3.7v-18v). I suspect the voltage regulator on the FC isn't able to regulate the power properly rather than a problem with the camera. Overall very happy with the quality of the camera itself

    N
    Nick
    Awesome

    New fav!

    D
    D.
    Didn't work got no video, terrible support

    I don't recommend buying newbie drone because they won't guarantee their product or replace it or refund you! They sent me a bad camera and a bad flight controller well at least one of them was bad and probably blew out the other I don't know but I've built dozens of quads and it wasn't my fault. But when I have something that I buy that's no good I expect to be able to get it warrantied and newbeedrone doesn't like to reply to their emails and when they do they ask stupid questions that you've already answered and they don't seem to know what they're talking about I sent them a video showing them the problem and everything about it and then they started asking questions that were explained in the video

    J
    John Smythe
    Fits right, looks good

    It fits perfectly into the NBD Beeeye V2 mount if you shave off the retaining tabs from the mount. I used E6000 glue in the corners for securing and zip tied a Nano400 vtx toro the whole package. I can’t say for certain the AntLite is as good as Ant but it’s much easier to mount, it’s light, and I’m using analog without onboard dvr, so I’m more interested in latency than clarity. It’s good!