Camera Butter DJI O3 Air Unit ND Filters and Lens Protectors
Pro quality optics andMade for Action
Made from incredibly strong Corning Gorilla Glass and ultra premium ND coatings, these ND filters for the DJI O3 air unit will reduce jello caused by vibrations, smooth out your video, minimize your props in view and give you cinema-style, extra smooth motion blur.
Made specifically for the DJI O3 air unit
Unlike filters that are primarily made for the Avata, the Camera Butter O3 filters and lens protectors are specially made for the O3 unit and the FPV use case. This means:
They fit tighter and stay on better than other filters
They are made to fit into a narrower space
They have little "wings" on the top and bottom to make them easier to remove
You can turn them 90 degrees and use the horizontally for extra space on the top and bottom
They aremuch tougher than other filters made from regular glass
Protect your lens
Both the ND filters and clear lens protectors are the only ones made from ultra-strong Gorilla glass, meaning that they can take a hit much better than other filters. Now you don't have to give up protection if you want to use an ND filter - the ND filters are just as strong. These filters are trulymade for action!
The kit comes with 4 different ND values for different lighting conditions, and a clear lens protector to protect your camera when you are not using filters.
Get the very best out of your O3 andprotect your camera better than any other filter available!
Easier on your camera
Due to the design of the O3 camera, continually inserting and removing filters can eventually wear away the plastic, which can mean a looser fit over time. Unlike other O3 filters (even ones thatlookalmost exactly the same!), the aluminum frame on our filters is carefully contoured to reduce sharp edges to reduce the wear on your camera. This is a labor-intensive process, but significantly decreases damage to your expensive camera.
The full pack contains:
ND4
ND8
ND16
ND32
Clear UV protector
Carrying case
Also available in 2-packs of the lens protector, and ND8/ND16 2-pack.
Note: Also due to the design of the DJI camera, some vignetting (dark corners) may appear in super wide mode using ANY filter, especially if stabilization is used.
Right away, this is the best 65mm Whoop I know. Not even close.
I ordered two, one is more or less stock, just the PEEK motor screws and V3 cockroach. The second is upgraded to 0702 27000kV but will go back because I like the 25000kV more because of smoother throttle response and perfect betaflight tune.
Now the but:
1. On both quads I had to replace the BeeEye for a spare one because both are out of focus.
2. the yellow props were way too loose and very brittle. I lost two on my maiden. Black, blue and red are very tight (too tight for such a fragile prop) but if you get them on without bending them, they will last.
3. why does the quad not come with the lighter frame right away?
4. PH2.0…. You know the drill.
On that price point, even after the frame and PEEK upgrade I can forgive these quality issues. Especially considering the great tune and quality FC and motors. But be sure to order a replacement cam and props right away.
This was kind of a late night lark. I'd seen this upgrade for the Mk3 for a while and pondered whether it was a gimmick or not, and I'm pleased to say it's a genuinely good upgrade. It has reduced the noise of my Mk3 considerably. I haven't noted any significant increase in print quality, but the old drone of the bed is gone and that's completely worth it.
