CNHL Ultra Black 1550mAh 14.8V 4S 150C Lipo Battery with XT60 Plug
Specifications:
Stock Number: 1551504BG
Capacity: 1550mAh
Voltage: 14.8V / 4-Cell / 4S1P
Discharge Rate: 150C Continual / 300C Burst
Charge Rate: 5C Max
Size(1-5mm difference): 31*39*78mm
Approx Weight(±5g) : 171g
Output Connector: XT60
Balance Connector: JST / XH
Wire (AWG): 12#
Package included: 1 Pack CNHL Utra Black 1550mAh 14.8V 4S 150C Lipo Battery with XT60 Plug
Compatible RC Models:
CNHL 4s ultra black series is designed for FPV drone racing. Higher energy density, lower internal resistance, higher discharge rates, and a longer life cycle. Wrapped in a black and clear protective shrink with foam padding
CNHL 1550mAh 4s lipo battery fit for FPV Drone Skylark m4-fpv250, Mini Shredder 200, Indy250 plus mojo 280, Qav250, Vortex and Emax nighthawk 250, Nemesis 240 Mini, HOVERSHIP MHQ2 (270), ZMR 250, Mini H, QAV250, QAV180 /210, Danaus, Vortex 285, FLIP FPV FRAME, HOVERSHIP MHQ2, etc..
Notice:
For the RC battery, only if the voltage and the plug match, then it will fit.
Please stop charging immediately when the cell voltage has been charged to 4.2V (Normal cell voltage is between 3.7V~4.2V).
To double make sure safe, please check first whether the battery surface is alright when you get it and whether the voltage is normal before using.
If the new battery won’t hold a full charge or loss the charge very quickly in a short time, please use the Balance Charger to charge and recycle several times first.
This was kind of a late night lark. I'd seen this upgrade for the Mk3 for a while and pondered whether it was a gimmick or not, and I'm pleased to say it's a genuinely good upgrade. It has reduced the noise of my Mk3 considerably. I haven't noted any significant increase in print quality, but the old drone of the bed is gone and that's completely worth it.
when i received mine the box and everything was not damaged but when i opened it the canopy was cracked and the VTX did not work when i tried my first battery. I'm alright with the vtx being DOA as all i really wanted was the motors and beeeye camara, But when i reached out to customer service i was blamed for crashing it (even tho i never flew it). beware the QC is total garbage. save your money and buy a Mobula6 from a reputable company like GetFPV for RDQ's. I wasn't going to write a review but after the email i received i don't want anyone else getting scammed.
I had a very personable experience shopping with my drone your team took the time to help me purchase exactly what I and also identified the additional accessories that I may need to purchase that way I would not have post purchase regret. I will definitely be shopping there again for more flight systems and accessories.
An absolute pleasure to fly. Handles incredibly well and responds to any input just as I expected.
The only criticism is not of the performance of the drone. Unfortunately, it arrived with damage to the canopy. But I was still able to fly it and make initial observations.
![[pre-order]BetaFPV A03 400mW 5.8G VTX](http://newbeedrone.com/cdn/shop/files/8c6db81bad1f7fab20f937b5a3deb50b_720x_2e752615-4a65-4c95-a2d8-df964bdc15b6_{width}x.webp?v=1700635982)
![[pre-order]BetaFPV Aquila16 FPV Kit](http://newbeedrone.com/cdn/shop/files/2_720x_f35023be-a70b-48e4-97c5-277987d855e7_{width}x.webp?v=1700619059)
![[pre-order]BetaFPV Moxon Radio Transmitter Antenna V2 (1pcs)](http://newbeedrone.com/cdn/shop/files/MOXON2.4_720x_aa23e915-1266-4875-bf6e-91bd353c6047_{width}x.webp?v=1700537807)
