This ESC has 30x30 mounting and can continuously provide 55A at 6s, enough for freestyle 5" and larger drones. The ESC runs BLHeli_32, which is faster and has more resolution than BLHeli_s ESCs.
Definitely recommend this esc for its reliability and value. Great performance, can adjust the pwm way up to 128 if needed. Runs great on my 6s 5.5" freestyle quad (auw 725g).
J
Joe Sollecito
Awesome
works awesome
K
Keith Trahan
Overkill for a 5" 6S build but I wanted to play around with BLHeli32 32.8 variable PWM frequency up to 128K. Also went with 55A over 45A for a few extra dollars.
The ESC took some work to get mounted 30x30. The FC I used mounted right on top without any problems so maybe my ESC was cut a little differently?
Right away, this is the best 65mm Whoop I know. Not even close.
I ordered two, one is more or less stock, just the PEEK motor screws and V3 cockroach. The second is upgraded to 0702 27000kV but will go back because I like the 25000kV more because of smoother throttle response and perfect betaflight tune.
Now the but:
1. On both quads I had to replace the BeeEye for a spare one because both are out of focus.
2. the yellow props were way too loose and very brittle. I lost two on my maiden. Black, blue and red are very tight (too tight for such a fragile prop) but if you get them on without bending them, they will last.
3. why does the quad not come with the lighter frame right away?
4. PH2.0…. You know the drill.
On that price point, even after the frame and PEEK upgrade I can forgive these quality issues. Especially considering the great tune and quality FC and motors. But be sure to order a replacement cam and props right away.
This was kind of a late night lark. I'd seen this upgrade for the Mk3 for a while and pondered whether it was a gimmick or not, and I'm pleased to say it's a genuinely good upgrade. It has reduced the noise of my Mk3 considerably. I haven't noted any significant increase in print quality, but the old drone of the bed is gone and that's completely worth it.
