Thanks to GaN technology, the DJI 65W Portable Charger is smaller but offers increased charging speeds. With two USB-C and USB-A output ports, it can charge the Intelligent Flight Battery and RC at the same time. It supports PPS and PD protocols and can charge your smartphone, laptop, and other devices.
Highlights
Universal ports, lightweight and portable
Works with Mavic 3 Batteries & RC Pro
Can Be Used with Mobile Devices
1 x USB Type-A & 1 x USB Type-C Port
GaN Gallium Nitride Technology
Up to 65W of Recharging Power
Supports USB PD & PPS Fast Charging
Can Recharge 2 Devices Simultaneously
100-240V Dual-Volt Compatible
Save room in your gear bag without sacrificing charging power with this65W Portable GaN USB Charger for Mavic 3, Mavic 3 Cine, Avata, DJI Goggles 2 BatteryfromDJI. Utilizing GaN (Gallium Nitride) technology within the charger, DJI can keep the size of the charger small while still delivering up to 65W of power to either two Mavic 3 intelligent flight batteries, a flight battery and an RC
In The Box
DJI 65W Portable Charger × 1
Specifications
Input Voltage: 100-240 V, 2 A, 50/60 Hz
Output USB-C: 5 V/5 A, 9 V/5 A, 12 V/5 A, 15 V/4.3 A, 20 V/3.25 A, 5-20 V/3.25 A
USB-A: 5 V/2 A
Rated Power: 65 W
Operating Temperature Range: 5° to 40° C (41° to 104° F)
Charging Time*:
Intelligent Flight Battery: Approx. 1 hour and 36 mins
DJI RC Pro: Approx. 1 hour and 30 mins (USB-C port)
* It takes longer time to fully charge the Intelligent Flight Battery and RC or other devices simultaneously. * Tested in a lab environment and should be taken as reference only.
These batteries performed noticeably better than the other 300mAh and 350 mAh batteries from competitors. If you're leisurely flying, the cheaper batteries will work, but if you want to have more power throughout the charge of the battery, these are better. On the downside, they cost more than the competition. Also, note that I soldered xt30 connectors because that was the connector on the drone we were using. So, I can't comment on the performance on the GNB27 connection
Works great. I've got 3 quads with this receiver now. It seems to be good quality, connected and flashed by wifi after soldering up. Binding went easily with the Radiomaster Pocket and I was off flying.