• Description

The new FETtec ESC 4in1 has just dropped! This high performance DShot 2400 ESC with full sine wave control now works with 3-6s. This is the most powerful and reliable 4in1 esc for the Fettec FC and Kiss FC.


FEATURES:

  • Active current limiting @ 45A
  • Input voltage: 3S-6S
  • High quality 40V MOSFETs
  • STM32G071 @ 64MHz
  • 128 kHz motor PWM
  • Full sine wave control
  • Solder points for up to 5 additional capacitors
  • KISS FC passthrough
  • Betaflight Passthrough (available from 4.1)
  • Automatic input signal detection:
    • Dshot 300-2400
    • PWM
    • OneShot42 / 125
    • OneWire BUS with up to 8kHz looptime (one cable for all motor signals and telemetry)
    • in development: Crossfire, SBUS

Dimensions:

Dimensions

  • 38mm x 38mm
  • Mounting hole: 30.5 mm x 30.5 mm, M3 breakable for M4

Firmware:

  • New FETtec firmware
  • FETtec Configurator for updates, configuration and telemetry. Standalone for MacOS, Windows 32 & 64 bit and Chrome plug-in

Includes:

  • 1x FETtec ESC 4in1 6S 45A
  • Capacitor 50V, ESC <1ohm (477CKE050M)
  • JST-SH 8 pin cable

Recommendation:

With 6S LiPos we recommend the use of a FETtec spike absorber


Description

The new FETtec ESC 4in1 has just dropped! This high performance DShot 2400 ESC with full sine wave control now works with 3-6s. This is the most powerful and reliable 4in1 esc for the Fettec FC and Kiss FC.


FEATURES:

  • Active current limiting @ 45A
  • Input voltage: 3S-6S
  • High quality 40V MOSFETs
  • STM32G071 @ 64MHz
  • 128 kHz motor PWM
  • Full sine wave control
  • Solder points for up to 5 additional capacitors
  • KISS FC passthrough
  • Betaflight Passthrough (available from 4.1)
  • Automatic input signal detection:
    • Dshot 300-2400
    • PWM
    • OneShot42 / 125
    • OneWire BUS with up to 8kHz looptime (one cable for all motor signals and telemetry)
    • in development: Crossfire, SBUS

Dimensions:

Dimensions

  • 38mm x 38mm
  • Mounting hole: 30.5 mm x 30.5 mm, M3 breakable for M4

Firmware:

  • New FETtec firmware
  • FETtec Configurator for updates, configuration and telemetry. Standalone for MacOS, Windows 32 & 64 bit and Chrome plug-in

Includes:

  • 1x FETtec ESC 4in1 6S 45A
  • Capacitor 50V, ESC <1ohm (477CKE050M)
  • JST-SH 8 pin cable

Recommendation:

With 6S LiPos we recommend the use of a FETtec spike absorber


Customer Reviews

Based on 14 reviews
86%
(12)
0%
(0)
14%
(2)
0%
(0)
0%
(0)
R
Ryan M
From Betaflight to Fettec

All I can say is, it’s a game changer. I’ll be saving up for another Fettec setup and slow alt change over all my quads. So much easier to setup, way better throttle control, and you get that locked in feeling that I’ve heard so much about.

M
Matt wilson loop
Best esc so far

This esc flies so well but beware they are fragile.

K
K.
Top notch

Great layout and performs excellent

P
PeterFPV
Best of the best!

Top notch! 💪

B
Bryan Croteau
Fettec 45a - KISS powerhouse

If you haven't tried KISS firmware combined with fettec software... you are missing out! By far the best feeling flight available, with the least amount of tuning required.