GEPRC CineLog20 Cinewhoop Frame

Summary

The GEPRC team has newly developed a 2-inch frame: GEP-CL20. The 2-inch frame can be shuttled in a narrow space, and can be adapted to O3 VTX, and can also shoot shocking effects in a narrow space. The resigned camera gimbal can easily eliminate the high-frequency vibration and jello issues. Soft connection damping design of the camera gimbal and can also be mounted with a naked GoPro base, which supports the installation of Naked GoPro 8/910/11, Insta360 Go2 and DJI Action2 cameras.

The flight controller mounting hole spacing is 25.5mm*25.5mm, which is compatible with various VTX holes on the market with 20mm*20mm/25.5mm*25.5mm. The 9mm * 9mm motor mounting hole is used to install larger 12-13 series motors, and the compact body makes the flight more confident.

Specification

  • Model: GEP-CL20
  • Wheelbase: 100mm
  • Main plate: 2.5mm
  • Bottom plate: 1.5mm
  • Camera gimbal plate: 2.0mm
  • Camera gimbal triangle plate : 1.5mm
  • Motor plate gasket: 2.0mm
  • FC mounting holes: 25.5mm x 25.5mm
  • VTX mounting holes: 20mm x 20mm /25.5mm x 25.5mm
  • Motor mounting holes: 9mm x9mm
  • FPV camera spacing: 20mm
  • Suitable propeller size: 2 inch propeller
  • Weight: 53.4g
  • Flight controller: GEP-F4-35A AIO (mounting holes: 25.5mm×25.5mm)
  • Motor: 1303.5 (mounting holes: 9mm×9mm)
  • ESC: 35A
  • Propeller: 2 inch
  • Recomended Battery: 4S 660mAh

Feature

1. Combining aesthetics and engineering for compact design

2. Designed to mount a shock-absorbing gimbal under the independent FPV camera to reduce jello of FPV Goggles image.

3. 2 inch pusher design, small size and lightweight, more suitable for complex and narrow environments flight shooting.

4. SPEEDX2 1303.5 5500KV motor with Emax four-blade propellers make the flight shooting unhurried.

5. Design the outer EVA damping ring to effectively reduce the impact force.

Includes

Plate:

1 x Main plate: 2.5mm

1 x Bottom plate: 1.5mm 

1 x Camera gimbal plate: 2.0mm  

1 x Camera gimbal triangle plate: 1.5mm

1 x Motor plate gasket: 2.0mm

Screw package:

4 x M2*1.9-OD4.9 self-clinching nut-brass color M2 

1 x 7075 Aluminum Column M2*3.5*28

1 x 7075 Aluminum Column M2*3.5*25

1 x Single-ended bright-edge aluminum column M2*3.5*28

1 x Single-ended bright-edge aluminum column M2*3.5*25

2 x Round head screw with pad M2*8

18 x Round head screw M2*8

4 x Round head screw M2*5

6 x Round head screw M2*4 X6

10 x Round head screw M2*12

4 x Round head screw M2*16

4 x Half-round head M1.6*8

18 x Round head screw M2*7

10 x Self-clinching nut M2

10 x Nylon nut M2

4 x Nylon column M2*5mm

4 x Camera gimbal shock absorbing rubber ring

5 x Camera gimbal vibration dampening rubber

4 x BEC silicone gasket

3D printed parts:

1 x VTX Antenna mount (big hole)

1 x VTX Antenna mount(small hole)

1 x Receiver mount

1 x Receiver mount

1 x TBS Antenna mount

1 x Camera mount (1 hole)

1 x Camera mount (2 holes) 

Injection molded parts:

4 x Propeller guard

Other accessories:

1 x Naked GoPro 8 base

1 x 4S Naked GoPro power cable (with balanced terminal head)

2 x Battery anti-slip pad

2 x Damping pad

4 x EVA damping ring

2 x Receiver antenna tubes 100mm

2 x Battery tie M15*150

1 x L-shaped screwdriver 1.5MM

2 x 3M double-sided tape

1 x Keychain

Customer Reviews

Based on 1 review
0%
(0)
0%
(0)
0%
(0)
0%
(0)
100%
(1)
T
TheTomJon
Standoffs not Long Enough for O3

Bought the BNF version; standoffs holding the O3 are 30mm -- bent them in a crash -- had bought a spare frame kit (CUZ GEPRC DOESNT SELL SPARE DUCTS) -- Standoffs in frame kit are 25mm and 28mm (BNF O3 standoffs are 30mm) -- therefore they are not ideal for O3. It holds O3 but you can no longer access SD card, and there is 1mm clearance between O3 and FC stack screws... considering you LAND ON THE O3 PLATE, a rough landing or bad crash WILL damage the O3 unit.