[pre-order]GEPRC TAKER F405 BLS 65A V2 STACK

Expected Ship Date: 10/25

Features

  1. Use mainstream STM32F405 chip
  2. Equipped with the latest 42688-P gyroscope
  3. 16M black box storage
  4. Integrated LC filter
  5. Upgrade type-C USB interface
  6. Directly plugged into the DJI Air Unit
  7. With TAKER H65_8S_BLS 65A 4IN1 ESC, the flying feel is silky
  8. Simple and reasonable installation method, the shock absorber can make the gyroscope work very stably
  9. 12V@2.5A + 5V@3A dual independent BEC

Specifications

GEP-F405-HD V3 Flight Controller
  • MCU:STM32F405
  • IMU:ICM42688-P(SPI)
  • Air Unit Connection:Direct plugging into DJI Air Unit
  • Black Box:16M onboard
  • Barometer: support
  • Motor outputs:M1-M6
  • USB Interface:Type-C
  • OSD:BetaFlight OSD w/ AT7456E chip
  • BEC:5V@3A,12V@2.5A dual BEC
  • Firmware Target:GEPRCF405
  • Size:37.15×37.15mm
  • Mounting: 30.5×30.5mm,φ4mm hole becomes φ3mm after using a silicone shock-absorbing circle
  • Input Voltage:3-6S LiPo
  • UART:6 UARTs
  • Power Filter:Integrated LC filter
  • Weight:7.3g
TAKER H65_8S_BLS 65A 4IN1 ESC
  • Input Voltage: 3-8S Lipo
  • Ammeter: Support
  • Continue Current:65A
  • Burst Current:70A(5 second)
  • Support Protocol: Dshot 150/300/600
  • Size:42×45.7mm,hole30.5×30.5mm,φ4mm hole becomes φ3mm after using the silicone shock-absorbing ring.
  • Weight: 14.9g
  • Target: B_X_30

Includes

1 x Flight Controller

1 x ESC

1 x Capacitor

1 x DJI Air Unit Adapter Cable

1 x Flight Controller Adapter Cable

1 x XT60 Power cable

4 x M3*30 Screws

4 x M3*25 Screws

8 x Nylon nuts

8 x Silicone grommets

2 x sh1.0 4pin silicone cable

1 x Camera connection cable

      


Customer Reviews

Be the first to write a review
0%
(0)
0%
(0)
0%
(0)
0%
(0)
0%
(0)