[pre-order]GEPRC TAKER F722 BLS 65A V2 STACK

Expected Ship Date: 10/25

Features

  1. Uses the mainstream STM32F722 chip
  2.  Equipped with the latest 42688-P gyroscope
  3. 16M onboard black box storage
  4. Integrated LC filter
  5.  Upgraded Type-C USB interface
  6.  Directly plugs into the DJI Air Unit
  7. Paired with the TAKER H65_8S_BLS 65A 4IN1 ESC, providing a smooth flying experience
  8.  Simple and efficient installation method with shock absorbers for stable gyroscope performance
  9.  Dual independent BECs: 9V@2.5A and 5V@3A

Specifications

GEP-F722-HD v2 Flight Controller
  • MCU: STM32F722
  • IMU: ICM42688-P(SPI)
  • Air Unit Connection: Direct plug-in to DJI Air Unit
  • Black Box:16M onboard
  • USB Interface: Type-C
  • Barometer: supported
  • OSD: BetaFlight OSD w/ AT7456E chip
  • BEC: 5V@3A,9V@2.5A dual BEC
  • Firmware Target: GEPRCF722
  • Dimension: 36.85×36.85mm, mounting hole size 30.5×30.5mm,φ4mm hole becomes φ3mm after using a silicone shock-absorbing circle.
  • Input Voltage: 3-6S LiPo
  • UART: 5
  • Power Filter: Integrated LC filter
  • Weight: 8.1g
TAKER H65_8S_BLS 65A 4IN1 ESC
  • Input Voltage: 3-8S Lipo
  • Ammeter: Supported
  • Continuous Current:65A
  • Burst Current:70A(5 seconds)
  • Support Protocol: Dshot 150/300/600
  • Dimension:42×45.7mm,mounting hole size30.5×30.5mm,φ4mm hole becomes φ3mm after using the silicone shock-absorbing ring.
  • Weight: 14.9g
  • Firmware Target: B_X_30

Includes

1 x FC board

1 x ESC board

1 x Capacitor

1 x DJI Air Unit adapter cable

1 x Flight controller adapter cable

1 x XT60 power cable

4 x M3*30 screws

4 x M3*25 screws

8 x Nylon nuts

8 x Silicone anti-shake pads

2 x sh1.0 4pin silicone cable

1 x Camera connection cable

      


Customer Reviews

Be the first to write a review
0%
(0)
0%
(0)
0%
(0)
0%
(0)
0%
(0)