NewBeeDrone Infinity255 AIO Flight Controller F7 MPU6000 45A 2-6S

NewBeeDrone Infinity255 AIO Flight Controller F7 MPU6000 45A 2-6S. This all-in-one controller features a 25.5x25.5 mounting base, ideal for 3-4 inch lightweight builds. With motor solder pads on both sides and a traditional layout, it's perfect for seamless integration into your setup. Plus, its MPU6000 and 45A 2-6S capability ensures superior performance and reliability. Ideal for drone enthusiasts looking for top-notch quality and seamless integration.

NewBeeDrone Infinity AIO 255 Flight Controller F7 MPU6000 45A 2-6S wire diagram1 NewBeeDrone Infinity AIO 255 Flight Controller F7 MPU6000 45A 2-6S wire diagram2

  • MCU: STM32F745VEH6
  • Gyro: MPU6000
  • Blackbox:128MB
  • 6-Pin DJI FPV Air Unit Connector
  • Micro USB Connector
  • UART1 - SBUS on DJI Connector (RX only)
  • UART2 - DJI Connector
  • UART3 – Free
  • UART5 – ESC
  • UART7 - Free
  • UART8 - Free
  • 4x SMT32G071 AM32 ESC MCU (After Jun 10 2024)
  • Continous Current 45A and 55A Burst ESC
  • 3-6S Battery Input
  • 12V 3A 30W Design for DJI FPV Air Unit
  • 37x32mm with 25.5x25.5 Mounting Holes
  • Weight: 10.2gr. without grommets
  • Betaflight OSD support Analog build
  • I2C_SCL I2C_SDA Ready
  • Buzzer Ready
  • LED Ready
  • 5V 3A Power supply for external LED or GPS module

  • 1x Infinity 255 AIO Flight Controller + ESC
  • 1x DJI O3 Cable 100mm (Silicon wire)
  • 2x 16Pin Cable 150mm (Teflon wire)
  • 13x Nylon Lock Nut
  • 5x Steel Screw M2x14
  • 4x Grommets Short, 4x Grommets Long
  • 1x 470uf 35v Electrolytic Capacitor
  • 1x XT30 Cable


Customer Reviews

Based on 1 review
100%
(1)
0%
(0)
0%
(0)
0%
(0)
0%
(0)
J
Joseph Alcantara
Great AIO

I've used on a 3.5in build and it works wonderfully. I wanted to try the pnp, but after the build, I prefer solder pads for a cleaner look (my shrink wrap wasn't the best for such tiny wires) although I know it wasn't meant for builds. Still 👍