NewBeeDrone has gone brushless! These 0802 18000kv motors were tested and then selected from many different KV and size options to give you the best overall flying experience. With more punch and more top end than traditional brushed motors, these brushless motors bring everything to the next level.
These motors come with JST-1.0 plugs installed but also come with a set of Micro JST-1.25's. The BeeBrain Brushless uses Flight controller uses JST-1.0 plugs.
These packs are designed for 1s packs such as the Nitro Nectar Gold 300mah HV 1s packs!


Specifications:
 
- 0802 Motor Size
- 18,000kv (Designed for 1s)
- 1mm Shaft size
- Lead wire solder pads
- JST-1.0 Plugs installed
- 24mm cable length
- 2.05g each

What does that mean in terms of performance?
Check out this video from team pilot DZ flying outdoors on 1s using our Nectar gold 300 packs and BeeBrain BL FC.

Customer Reviews

Based on 29 reviews
83%
(24)
0%
(0)
7%
(2)
3%
(1)
7%
(2)
J
JoeE
Works good.

Can't really tell too much of a difference between these and the plaid 0802s, but I'm not super picky with my whoops and they both work well

A
Alexander Cormia
Goldilocks motor

0802 18000kv sits in the "sweet spot" for flight time and power. Too high KV and yeah it'll rip, but you'll be done in 2 mins. Too low and it will have longevity, but will put you to sleep and will be in the upper portion of throttle.

I'd say these are the best for 1s 31mm-40mm props for beginners. Haven't tried them with 1mm shaft 65mm props on a mosquito XL frame to say how they preform. But on a 40mm regular mosquito frame, they are a blast! Also super easy to swap FC and motors to either a 65mm or 75mm whoop frame.

D
Dan Sullinger
good motors

great for your build

J
Jeff Fothergill
DOA

Replaced 4 working EX0802 with these to find only 2 of the new gold motors working properly. 1 doesn't start half the time, the other doesn't work at all, and is way tighter / harder to spin by hand than the others. I've since replaced with Tiny Whoop motors, and oh wow look at them all work as they should. This is the 3rd time I've received faulty products in the few orders I've placed with NBD. This is the second time my emails and FB chats have been ignored by customer service on the replacement of these bad products. It's been a week and Dalton can't find the time to return a simple email about when replacements will be available or give a refund. Never again buying from NBD.

l
lee
big upgrade from brushed

my first brushless whoop motors, neat!
much better and they don't die after a week.