• Description

The BeeBrain BLV3 BNF!

As seen on DRL (Drone Racing League) 

 

 

DRL Drone Racing League Tiny Drone Ready to Fly Kit Micro
DRL Drone Racing League Tiny Drone Ready to Fly Kit Micro

What's new? Included in the AcroBee65 BLV3 are the improved BeeBrain BLV3 Flight controller and Gold Unibell 0802 18000KV Motors. 

The latest iteration of the BeeBrain BL Flight Controller contains massive improvements to the performance of the built in FrSky Receiver and built in video transmitter.

In addition, the ESC MOSFETs were upgraded to support the power demands of micro toothpick drones.

The solder pads on each ESC were enlarged to enable custom builds! With plenty of surface area and spacing, you can now solder on any motor of your choosing.

Receiver Improvements - 50% More Range

  1. Optimized SPI Receiver hardware to improve efficiency within the receiver.
  2. Removable antennas.
  3. Additional low noise amplifier to increase range.
  4. Optional wiring harness is available to install an external receiver (Crossfire, Ghost, etc)

Video Transmitter Improvements - 120mW

  1. New heatsink and layout to increase heat dispersion and efficiency.
  2. Transmitting power increased to 120mW from 25mW (V2)

Optional External Receiver

If you would like to install an external receiver, you will need to purchase this 4 pin JST cable. Click here for the manual to install an external receiver.

Suggested Accessories

Additional Information

Recommended battery: NewBeeDrone Nitro Nectar Gold 300mAh

Betaflight 4.1.7 Tuned Firmware Download 

Betaflight 4.2.9 Untuned Firmware Download

NewBeeDrone AcroBee65 BLV3 Tiny Whoop BNF
NewBeeDrone AcroBee65 BLV3 Tiny Whoop AIO Flight Controller + ESC + Receiver + Vtx
NewBeeDrone AcroBee65 BLV3 Tiny Whoop BNF Improved Receiver
NewBeeDrone AcroBee65 BLV3 Tiny Whoop BNF Efficient Vtx and ESCs
NewBeeDrone AcroBee65 BLV3 Tiny Whoop BNF Unibell Gold 18000KV 0802 Motors Azi Tri Blade Propellers
NewBeeDrone AcroBee65 BLV3 Tiny Whoop BNF RGB LEDs
NewBeeDrone AcroBee65 BLV3 Tiny Whoop BNF Durable Cockroach Frame
NewBeeDrone AcroBee65 BLV3 Tiny Whoop BNF Light Weight
NewBeeDrone AcroBee65 BLV3 Tiny Whoop BNF Betaflight JESC Firmware

Build Components

BeeBrain BLV3 Flight Controller Specifications

  • STM32F411 MCU
  • ESC Firmware: Ships with JESC 48 KHz. BLHeli_s capable.
  • ESC Specifications: 4 channel 12A ESC
  • Weight: 6 grams (including antennas and battery connector)
  • Size: Outer dimensions 29 x 29 x 7.6 mm
  • Holes: 25.5 x 25.5 mm
  • Battery input: 1 – 2 S
  • UART2 TX and RX free for external receiver (un-inverted SBus signal only)

Note: The default power mode is low (5mW). Set the power level to medium (50mW) before flying.

Includes

  • 1x AcroBee65 BLV3 BNF
Description

The BeeBrain BLV3 BNF!

As seen on DRL (Drone Racing League) 

 

 

DRL Drone Racing League Tiny Drone Ready to Fly Kit Micro
DRL Drone Racing League Tiny Drone Ready to Fly Kit Micro

What's new? Included in the AcroBee65 BLV3 are the improved BeeBrain BLV3 Flight controller and Gold Unibell 0802 18000KV Motors. 

The latest iteration of the BeeBrain BL Flight Controller contains massive improvements to the performance of the built in FrSky Receiver and built in video transmitter.

In addition, the ESC MOSFETs were upgraded to support the power demands of micro toothpick drones.

The solder pads on each ESC were enlarged to enable custom builds! With plenty of surface area and spacing, you can now solder on any motor of your choosing.

Receiver Improvements - 50% More Range

  1. Optimized SPI Receiver hardware to improve efficiency within the receiver.
  2. Removable antennas.
  3. Additional low noise amplifier to increase range.
  4. Optional wiring harness is available to install an external receiver (Crossfire, Ghost, etc)

Video Transmitter Improvements - 120mW

  1. New heatsink and layout to increase heat dispersion and efficiency.
  2. Transmitting power increased to 120mW from 25mW (V2)

Optional External Receiver

If you would like to install an external receiver, you will need to purchase this 4 pin JST cable. Click here for the manual to install an external receiver.

Suggested Accessories

Additional Information

Recommended battery: NewBeeDrone Nitro Nectar Gold 300mAh

Betaflight 4.1.7 Tuned Firmware Download 

Betaflight 4.2.9 Untuned Firmware Download

NewBeeDrone AcroBee65 BLV3 Tiny Whoop BNF
NewBeeDrone AcroBee65 BLV3 Tiny Whoop AIO Flight Controller + ESC + Receiver + Vtx
NewBeeDrone AcroBee65 BLV3 Tiny Whoop BNF Improved Receiver
NewBeeDrone AcroBee65 BLV3 Tiny Whoop BNF Efficient Vtx and ESCs
NewBeeDrone AcroBee65 BLV3 Tiny Whoop BNF Unibell Gold 18000KV 0802 Motors Azi Tri Blade Propellers
NewBeeDrone AcroBee65 BLV3 Tiny Whoop BNF RGB LEDs
NewBeeDrone AcroBee65 BLV3 Tiny Whoop BNF Durable Cockroach Frame
NewBeeDrone AcroBee65 BLV3 Tiny Whoop BNF Light Weight
NewBeeDrone AcroBee65 BLV3 Tiny Whoop BNF Betaflight JESC Firmware

Build Components

BeeBrain BLV3 Flight Controller Specifications

  • STM32F411 MCU
  • ESC Firmware: Ships with JESC 48 KHz. BLHeli_s capable.
  • ESC Specifications: 4 channel 12A ESC
  • Weight: 6 grams (including antennas and battery connector)
  • Size: Outer dimensions 29 x 29 x 7.6 mm
  • Holes: 25.5 x 25.5 mm
  • Battery input: 1 – 2 S
  • UART2 TX and RX free for external receiver (un-inverted SBus signal only)

Note: The default power mode is low (5mW). Set the power level to medium (50mW) before flying.

Includes

  • 1x AcroBee65 BLV3 BNF

Customer Reviews

Based on 42 reviews
69%
(29)
5%
(2)
12%
(5)
5%
(2)
10%
(4)
S
Simon Saucy
LOVE this little guy!+

flys great and works even better great starter drone

C
Christian Beza
Fun!

Great whoop to fly around the house! Durable frame and canopy so far. I wish the camera was a better quality.

A
Addison richards

NewBeeDrone AcroBee65 BLV3 BNF

C
Charles Richardson
No issues

I bought this my first real modern quad to fly in the house since where I live its frozen for 6 months out of the year. I wanted something that I could fly in the house and performed very well. This being my first quad in general and wanting to jump straight into 5inch in the spring I decided this would be a good cheap spot to start flying and get some stick time before I send a 5inch to the moon. After about 3 weeks of ownership I'm having a great time with it and its nice to have something you can just fly whenever. I wouldn't say this is great for a beginner or anything because you can get cheaper whoops if you're not very serious. But if you want to fly and tune something that is close to tuning a bigger quad (meaning it has all the kinds of stuff that you can put the time into a learn how filters, PIDs, ESC protocols etc work to fly it to your full potential) this is a good spot to start getting into the nitty gritty.

Also I recommend getting an XJT module for these SPI receivers if you're on FRSKY. Not expensive at all and D8 makes your life a lot easier without having to run old firmware on an internal module for your transmitter.

R
Roberto Camacho
BBBL V3

I love it, so far it's withstanding all the abuse!!!💯💯💯💪💪💪