• 
• 
• 

BeeKart AcroBee65 Brushed Car Conversion Kit 

It's time to DRIFT!

We bring you the BeeKart, our first car frame for 65mm brushed whoops.

*Please note: you will receive the necessary files to print and configure the car. No physical items will be shipped.

This 3D-printed kit will turn most brushed whoops into fully functional FPV race cars!

If you have an AcroBee65 or any other brushed whoop that runs Betaflight, this is a great kit to bring a new life to them.

No additional hardware needed other than the 3D printed parts, which you can get today for the price of FREE!

Thanks to the onboard gyroscope of these flight controllers, you can easily go sideways without spinning out! The true 4WD drivetrain will provide you with superior handling, whether you are driving LOS or FPV.

Printing Instructions:

1. Print the chassis, spoiler and FC bracket in PETG with 10% infill;
2. Print the 4 tires in TPU with 5% infill;
3. We recommend printing using 0.4mm nozzle and 0.2mm layer height;
4. No support needed, just lay all of the parts on their flattest side.

Betaflight Instructions:

If you have a NewBeeDrone AcroBee65 Brushed V2 ELRS, go ahead and use the full CLI dump: https://drive.google.com/file/d/1cJFSav25w4I8HHOsnxe19lSNxCy6aFEC/view?usp=sharing

If you have an older brushed whoop, make sure it runs a recent version of Betaflight and use this universal CLI dump we created: https://drive.google.com/file/d/1NeymacOryrXP82fw-uERpAw7WjrvNTMi/view?usp=sharing

The UNIVERSAL CLI DUMP FILE has been tested on our BeeBrain Pro and BeeBrain Lite. Compatibility with other brands' brushed whoops can not be guaranteed.