The SKY02O is the upgraded version of the classic SKY02 series. Now with a 640*400 resolutionOLEDscreen, these goggles have vivid color and high contrast ratio so the pilot can see more details while racing compared to non-OLED screens. With the steady view receiver, the receiver merges two signals to one, which helps avoid image tearing and rolling, making the image more stable and clear in challenging conditions. The new colorful user interface has user-friendly menu navigation to make changing settings a breeze.
Features
Built-in de-fogging and heat-sink fan
640X400 OLED resolution display
Patch and Omni antenna
Steady-View Receiver
Built-in Head tracker
Channel scanning
48 Channels
Specifications
Memory: SD Card supports up to 64GB (MJPEG, 30fps, AVI)
Purchased this looking forward to not having a big box on my head. Unfortunately the screen is much smaller than I expected, and with the footprint of the googles, I have to have them well below the bridge of my nose to see the screen, which makes for a very uncomfortable fit.
j
joe girty
Nice goggles
for being skyzones budget goggles they are pretty good. fit my face well .clear and bright. OK res.
Right away, this is the best 65mm Whoop I know. Not even close.
I ordered two, one is more or less stock, just the PEEK motor screws and V3 cockroach. The second is upgraded to 0702 27000kV but will go back because I like the 25000kV more because of smoother throttle response and perfect betaflight tune.
Now the but:
1. On both quads I had to replace the BeeEye for a spare one because both are out of focus.
2. the yellow props were way too loose and very brittle. I lost two on my maiden. Black, blue and red are very tight (too tight for such a fragile prop) but if you get them on without bending them, they will last.
3. why does the quad not come with the lighter frame right away?
4. PH2.0…. You know the drill.
On that price point, even after the frame and PEEK upgrade I can forgive these quality issues. Especially considering the great tune and quality FC and motors. But be sure to order a replacement cam and props right away.
This was kind of a late night lark. I'd seen this upgrade for the Mk3 for a while and pondered whether it was a gimmick or not, and I'm pleased to say it's a genuinely good upgrade. It has reduced the noise of my Mk3 considerably. I haven't noted any significant increase in print quality, but the old drone of the bed is gone and that's completely worth it.
![[pre-order]BetaFPV A03 400mW 5.8G VTX](http://newbeedrone.com/cdn/shop/files/8c6db81bad1f7fab20f937b5a3deb50b_720x_2e752615-4a65-4c95-a2d8-df964bdc15b6_{width}x.webp?v=1700635982)
![[pre-order]BetaFPV Aquila16 FPV Kit](http://newbeedrone.com/cdn/shop/files/2_720x_f35023be-a70b-48e4-97c5-277987d855e7_{width}x.webp?v=1700619059)
![[pre-order]BetaFPV Moxon Radio Transmitter Antenna V2 (1pcs)](http://newbeedrone.com/cdn/shop/files/MOXON2.4_720x_aa23e915-1266-4875-bf6e-91bd353c6047_{width}x.webp?v=1700537807)
