Lightweight design, ultra-thin experience Walksnail VRX only 83g and comes with 114*55*22mm size, easy to carry.
Walksnail VRX adopts 4 antenna design, 2 directional antennas, the maximum transmission distance is 4km
1080P/60FPS Walksnail VRX adopts industry-leading H.265 encoding technology, which can provide a minimum delay of 22ms and a maximum resolution of 1080p. The HD picture quality takes you to experience the fun of flying a drone.
HDMI output ensure you to enjoy uncompressed audio and video signals from the Walksnail HD system
Canvas Mode Supports betaflight full OSD display,supports betaflight, inav, kiss full osd display you can easily adjust the parameters you want by remote control.
Specification
Camera
Model
Avatar nano/Avatar camera
Image Sensor
1/2.7”1nch
Resolution
1080P/60fps,720P/120fps,720P/60fps
Ratio
16/9 4/3
Lens
2.1mm
FOV
170°
Aperture
F2.0
Shutter
Rolling shutter
Min.Illumination
0.001Lux
Weight
3.5g/6g
Dimensions
14*14*17mm/19*19*22mm
Coaxial Cable
90mm/140mm
VTX
Model
Avatar module
Communication Frequency
5.725-5.850GHz
Transmitter Power (EIRP)
FCC:<30dBm;CE:<14dBm;SRRC:<20dBm; MIC:<25dBm
1/O Interface
JST1.0*6(Power in)JST1.0*4(USB)
Mounting Holes
25.5*25.5mm
Dimensions
33*33*9.5mm
Storage
8G
Recording
1080p/720p
Weight
16g
Operating Temperature
-20-40℃
Channels
8
Wide Power Input
6V-25.2V
Supported FC System
Betaflight
OSD
Canvas mode
Latency
Average delay 22ms
Antenna
2(IPEX)
Goggles Antenna
Model
Red bird
Polarization
LHCP
Bandwidth
5.6GHz-6.0GHZ
Average Gain
1.9dBi
Radiation Efficiency
≥97%
VSWR
≤1.3
Cross-Polar Rejection
-15to-30dB
Connector
RP-SMA
Dimension
H24.8mm*R15.3mm
Weight
4.2g
Avatar HD VRX
Model
Avatar HD VRX
CommunicationFrequency
5.725-5.850GHz
TransmitterPower(EIRP)
FCC:<30dBm;CE:<14dBm;SRRC:<20dBm;MIC:<25dBm
I/OInterface
HDMI,microSDcardslot,DC5.5*2.1mm
HDMIOutput
1080p60fps,720p100fps,720p60fps
PowerInput
7-21V(2S-5S)
SDCard
Support256G
System
AvatarHDsystem
Packing List
Avatar VRX
×1
RedBirdAntenna
×2
HDMICable
×1
2in1DCPowerCable
×1
Q&A
Q:Is VRX compatible with goggles from other products? A:Compatible With Analog Goggles,HDMI Out(Our VRX module supports HDMI OUT, If you goggles support HDMI IN it will work fine)
Q:Do i need a set of goggles with a 1080p resolution or an 720p is enough? A:VRX supports 720P\1080P
Q:Avatar HD Micro kit come with a 140mm cable between the VTX and camera? A: yes
Q:does the Pre-sale unit fit 20x20 mount? A:Our vtx is 25*25
Q:the difference between all 3 of the walksnail kits? What is the Avatar 1s vs avatar hd micro vs avatar HD nano?
A: mini 1s kit 350mw, Power Input: 3.1V-5V, VTX Weight 6.8g
avatar HD micro/nano kit standard version 1200mw, Power Input: 6V-25.2V, VTX Weight: 16g
Q:Micro/Nano Camera difference? A: Weight:3.5g/6g Dimensions:14*14*17mm/19*19*22mm Coaxial Cable:90mm/140mm
I know we live in a 3d printed world, but I don't have a 3d printed girl. So I can't print my 3d printed toys, cuz I'm one of the non 3d printer boys. Walksnail is really stepping up their game lately. The night sensitivity on the HD Pro V2 cam is noice! This helps me use my HDZeros for EVERYTHING I use. Analog, HDZero and now Walksnail.
Right away, this is the best 65mm Whoop I know. Not even close.
I ordered two, one is more or less stock, just the PEEK motor screws and V3 cockroach. The second is upgraded to 0702 27000kV but will go back because I like the 25000kV more because of smoother throttle response and perfect betaflight tune.
Now the but:
1. On both quads I had to replace the BeeEye for a spare one because both are out of focus.
2. the yellow props were way too loose and very brittle. I lost two on my maiden. Black, blue and red are very tight (too tight for such a fragile prop) but if you get them on without bending them, they will last.
3. why does the quad not come with the lighter frame right away?
4. PH2.0…. You know the drill.
On that price point, even after the frame and PEEK upgrade I can forgive these quality issues. Especially considering the great tune and quality FC and motors. But be sure to order a replacement cam and props right away.
This was kind of a late night lark. I'd seen this upgrade for the Mk3 for a while and pondered whether it was a gimmick or not, and I'm pleased to say it's a genuinely good upgrade. It has reduced the noise of my Mk3 considerably. I haven't noted any significant increase in print quality, but the old drone of the bed is gone and that's completely worth it.