Hummingbird V3 BNF

 

Unbelievable performance with unbelievable  value. Best racer whoop just got better again. At $89.99, there is no brushless whoop with this quality in the market. 

 

Compared to Hummingbird V2, now with built-in VTX. Special X-shaped board with F4 processor, built-in 25mW video transmission, SPI ELRS receiver, and LEDs. Plug-and-play everything. Completely no soldering. Easy fast fixes when parts break.

 


We found the best ratio between the size of drone and its weight distribution. Extra weight-saving from true all-in-one board. X-shaped board to save un-needed weight at corners. Compared to V2, we saved 1.3 grams. Total weight up to 23.31grams. Up to 4 minutes with Nitro Nectar 300mAh batteries racing at insane fast speed. 

 


We believe in good chaos in this world. Add a little surprise and color in your life. If you REALLY don't like the color, you can always get replacement and choose a new color when you break the frame with our unlimited frame warranty. 

 


Designed to be 100% compatible with Nitro Nectar Gold for best performance. Super smooth and longer-lasting flights.

 


0802 25000kv Motors  - Super high kv for fast speed.  3-blade Azi propellors -  Developed with engineering theory for optimal air-grab and stability. 

 

Our support team in the United States are here to help. US customers enjoy Unlimited Frame Warranty from our site. For more info, visit here. For other countries, please ask your local store to see if they offer replacement.

 

Every machine or instruments needs tuning to get optimal performance. Same goes for drones. This bird is all ready to go right out of the box. 

 

Specifications:

Drone Size: 65mm
Flight Controller: Hummingbird V3 ELRS AIO Flight Controller
Frame: Cockroach65 Brushless Frame Random Color
Motors: Hummingbird 0802 Motor 25000KV  
Propellesr: Azi Tri-Blade 31mm Propeller Random Color
Camera: BeeEye Camera
Canopy: Goober Canopy v1 Random Color
Total Weight of the Drone without battery:

-21.85g (PP Material Cockroach65 frame)

-23.33g (PC Material Cockroach65 frame)

Click here to download Latest Firmware.

 

 Review Video:










CiottiFPV's extreme deep review lol

Hummingbird V3 ELRS AIO Flight Controller Specs:


MCU: STM32F411
GYRO:BMI270
VTX:  25mw with BeeTX 5.8Ghz Antenna
ESC: 12A BLHeliS pre-flashed with Bluejay 0.19.2 Target: O-H-10 48kHz
ESC Connector: JST-1.0 3Pin
OSD: NBD7456 Graphical OSD compatible with Betaflight OSD
Receiver: 2.4G Antenna with MHF3 connector
Flight Controller Weight: 4.57g(Include antennas and battery connector) RS 3.23
Flight Controller Size: Outer dimensions: 29x29x7.6mm
Flight Controller Holes: 25.5x25.5mm
Battery input: 1S Only
Uart1: free
Uart2: free
Power Plug: Nectar Connector Gold Plated PH2.0 Solid Pin

SPI ELRS3.0 receiver (Binding instruction: power on the drone, push the bind button under the flight controller to get into bind mode. If your remote control is not ELRS3.0 or above version. You will need to update your remote controller ELRS to 3.0 version because betaflight 4.4 will no longer support any lower version of 3.0)
Please read through the SPI base information if you have difficulty with binding

Recommended Batteries:

Nitro Nectar Gold 300 mAh 1S PH2.0 
Nitro Nectar Gold 250 mAh 1S PH2.0

Firmware

1. NewBeeDrone Github page

 

What’s included: 

1x Hummingbird V3 ELRS 65 BNF with 25000kv motor

Warning: 

This drone has been carefully crafted using only newbeedrone parts. It is important to note that any use of non-compatible parts from other brands may result in technical difficulties. Additionally, should you choose to modify the drone, it is crucial that you assume full responsibility for any resulting issues. It is not advisable to proceed with modifications without the necessary knowledge and expertise. We appreciate your understanding and cooperation in ensuring the safe operation of the drone.

If you mess up the setting? 

The stock firmware comes with all settings, including PID tune data. If you change anything and feel that it does not perform as well as the original settings, you can reset it in Betaflight under the Setup tab to bring it back to the factory default.

Binding procedure:

To bind, connect to USB power or a battery source. Push the bind button on the front bottom of the flight controller to trigger the binding mode. Bind it to your radio controller. (Note: The Hummingbird v3 only supports ELRS 3.0 or a later version. If your remote controller is ELRS 2.5, you will need to update your ELRS TX Module.)

Bind video:

 

Customer Reviews

Based on 36 reviews
69%
(25)
17%
(6)
8%
(3)
3%
(1)
3%
(1)
M
Mark
great whoop, great price, easy maintenance

It lives up to it's name by outflying any other bnf whoop I own, like the tiny but mighty hummingbird, who have been known to harass the bald eagle. All plug and play for easy fix in case you crash, which you will, Because that's how we learn.

S
Steven Woodruff
Just Better

Between the Happymodel Mobula 6 and the hummingbird, the choice was obvious. Despite the Mobula 6 having better components overall, the AIO, motors, and frame on the Hummingbird are used by most high-level pilots for their reliability, consistency, and quality. Being below $100, I expected to get a cheap, unreliable, disposable drone that would be a pain. After getting it and flying it for the first time, I can confidently say this is the best drone for beginners. The parts are all high quality, the company is easy to contact, and the price is unbeatable. Definitely the best all-around drone.

A
Alexander Fultz
Great product. Great company.

I love having a US based drone company that's there for you. FPV can be a struggle being that most drone companies are based in China. Replacement parts usually take months and email responses can take weeks.
NewBeeDrone customer service will get back to you in less than a day! And replacements in less than a week! Love love this company.

K
Kevshabar
Great whoop, easy to to control, super durable.

Prop guards provide good protection, can still zip around fast. Flight time with 300mah betafpv bt2.0 1s batteries is consistently 2:20-2:30. Only complaint is I wish it came with the bt2.0 connector. I replaced the ph2.0 with bt2.0.

C
Christopher Chu
Binding quirk

I gave up trying to bind to my JumperTPro v2 4in1 with elrs external module, and it wasn’t until I watched J Bardwell vid saying you have to use latch switch SA for the ARM switch - knowing this, binding to RM Pocket was straight forward.