NeutronRC AT32F435 mini AIO, 32 Bit AM32 ESC,Board Flight Controller with 25.5*25.5mm Mounting pattern for FPV drone
AboutATBETAFLIGHT, it is a special branch of BETAFLIGHT, which is different from the MCU master control using non-ST chips, has a lower price, and a complete BMI270 driver, allowing it to calibrate the gyroscope at startup and have better flight stability .
Currently, the QUICKSILVERfirmware has been perfectly supported, and it performs perfectly on a small frame with a protective frame
1. How to connect BETAFLIGHT CONFIG software and the difference with BF;
1.2, betaflight 10.9 Configurator Opens the following setting options
2. About the AM32 ESC, there is a known bug in the AM32 version of the website, which causes malfunctions after writing or modifying the ESC. We have submitted a PR to fix this issue. Currently, you can use the development version web configurator to modify the AM32 ESC configuration
About Betaflight's support for artery MCU:
The current BF 4.4.X version does not support the AT32F435 chip. Our default firmware is based on the 4.3.2 branch. At present, it is seen in the BETAFLIGHT code base that BF4.5 will soon support the AT32F435 chip, and the specific progress is uncertain.
How to update FC and ESC firmware, please refer to the download document
The default FC Flash ATbetaflight 4.3.2-RC4 firmware, ESC flash HF32 firmware, usually, you do not need flash FC and ESC firmware, just install and set related options according to your settings. HF32 ESC Configurator
So far, extremely happy with it. I would probably give this one a six out of 5 stars with the ease of setting it up and putting it in my drone and flying it. The only problem is is I have it in a foxwhoop 35 and not a 3-in race drone so I don't know the true durability of this all in one. But, from what I've experienced so far I would be more than willing to buy this board as a replacement for any of the all-in-ones that I have on any of my droI would probably give this one a six out of 5 stars with the ease of setting it up and putting it in my drone and flying it. The only problem is is I have it in a fox whoop 35 and not a 3-in race drone so I don't know the true durability of this all in one. But, from what I've experienced so far I would be more than willing to buy this board AGAIN as a replacement for any of the all-in-ones that I have on any of my drones (that requires a AIO)
At first I have a relatively low flight time with my Meteor65 Pro. Then I decided to lighten the Pro. I think because the motors (smaller) have a lower current draw the Nitro Nector Golds are really shining. It is at least comparable to a lot of other packs I have. So the capacity is definitely great, just don’t use them in a high current environment and they will work very well.