The BT3.0 connectors are designed for the 2S battery, with 3 metal pins that enable balancing power when charging without an extra balancer connector. It simplifies 2S battery assembly and weighs only 1.28 grams, making it smaller and super lightweight than regular connectors on the market. For 2S quad pilots, it also presents a more convenient choice for the 2S battery, as well as the better option for minus some grams off the quad.
Bullet Point
An innovative option for 2S whoop drone battery, designed specifically for 2S whoop drones.
The BT3.0 connectors offer unparalleled convenience, combining balance charging and discharge power cord functionalities into a single connector, eliminating the need to purchase an expensive balance charger.
The BT3.0 connectors are smaller and lighter in weight, with a total weight of only 1.28g for both male and female connectors, compared to regular connectors.
The BT3.0 connectors boast a rated discharge current of 12A and an instantaneous current of up to 20A, meeting the discharge requirements of 2S batteries.
Specifications
BT3.0 Male Connector: 0.6g/PCS, 11.2*9.2*6.1mm
BT3.0 Female Connector: 0.68g/PCS, 10.1*9.1*5.4mm
BT3.0 Male+Female Connector: 1.28g/PCS
BT3.0 XH2.54 Adapter Cable: 1.84g/PCS, 35mm
BT3.0 2S Whoop Cable Pigtail: 1.39g/PCS, 30mm
Insertion Force: 3-22N
Color: White
Metal Material: Gold-plated copper
Plastic Material: PA9T
Plug Lifespan: 1000 times
Rated Current: 12A
Instantaneous Current: 20A
BT3.0
BT2.0
XT30
Rated Current
12A
9A
15A
Instantaneous Current
20A
15A
30A
Weight
1.28g
0.6g
1.8g
Size
10.1*9.1*5.4mm
8.5*6.0*4.2mm
12.4*10.2*5.2mm
Below is the diagram for the male, female connectors.
BT3.0 Connectors
The BT3.0 connectors are a 3PIN terminal, two metal pins with a diameter of 1.3mm are used for battery discharge, and two metal pins with a diameter of 1.3mm and a metal pin with a diameter of 1.0mm are combined into a 3PIN connector as a balanced charger for battery charging. The BT3.0connectors have polarity marks on theirwelding cup but don't support reverse connections. Whenwelding wires, make sure to pay attention to the positive and negative directions. The connector's design prevents reverse connections, so do not force it in the opposite direction to avoid short circuit risks.
BT3.0 2S Whoop Cable Pigtail
This power cable with the BT3.0 connector is specially made for a 2S whoop drone. The male connector and the power cord are at a 90-degree angle, which makes it easy to plug and unplug. The insertion and extraction force range is 3-22N, making daily use more effortless. It fits 2S FC and 2S quadcopter.
When you resolder your board, please pay attention to the connection method. BT3.0 Cable Pigtail is composed of blue wire and white wire. The blue wire is the positive pole(+), and the white wire is the negative pole(-).
BT3.0-XH2.54 Adapter Cable
The BT3.0 connector can serve as a 2S balance charging port and can be used with a conventional 2S balance charger to charge the battery through a BT3.0 male-to-male adapter cable, providing customers with greater flexibility to choose their own charging method.
BT3.0 Series Accessories
The BETAFPV BT3.0 series accessories represent a line of products tailored exclusively for 2S whoop drones, comprising three categories of items, connectors, battery, and charger, forming an integrated set of accessories capable of working in perfect harmony. The BT3.0 connectors obviate the need for balance connectors while streamlining the BT3.0 450mAh 2S Battery (2PCS) and enabling greater convenience and higher performance of the 2S drones. When used in conjunction with the 2S Battery Charger, a more efficient and stable charging experience can be realized.
We highly recommend combining the following products to upgrade your 2S whoop drone with a set of efficient and user-friendly accessories:
Right away, this is the best 65mm Whoop I know. Not even close.
I ordered two, one is more or less stock, just the PEEK motor screws and V3 cockroach. The second is upgraded to 0702 27000kV but will go back because I like the 25000kV more because of smoother throttle response and perfect betaflight tune.
Now the but:
1. On both quads I had to replace the BeeEye for a spare one because both are out of focus.
2. the yellow props were way too loose and very brittle. I lost two on my maiden. Black, blue and red are very tight (too tight for such a fragile prop) but if you get them on without bending them, they will last.
3. why does the quad not come with the lighter frame right away?
4. PH2.0…. You know the drill.
On that price point, even after the frame and PEEK upgrade I can forgive these quality issues. Especially considering the great tune and quality FC and motors. But be sure to order a replacement cam and props right away.
This was kind of a late night lark. I'd seen this upgrade for the Mk3 for a while and pondered whether it was a gimmick or not, and I'm pleased to say it's a genuinely good upgrade. It has reduced the noise of my Mk3 considerably. I haven't noted any significant increase in print quality, but the old drone of the bed is gone and that's completely worth it.
when i received mine the box and everything was not damaged but when i opened it the canopy was cracked and the VTX did not work when i tried my first battery. I'm alright with the vtx being DOA as all i really wanted was the motors and beeeye camara, But when i reached out to customer service i was blamed for crashing it (even tho i never flew it). beware the QC is total garbage. save your money and buy a Mobula6 from a reputable company like GetFPV for RDQ's. I wasn't going to write a review but after the email i received i don't want anyone else getting scammed.
I had a very personable experience shopping with my drone your team took the time to help me purchase exactly what I and also identified the additional accessories that I may need to purchase that way I would not have post purchase regret. I will definitely be shopping there again for more flight systems and accessories.
