All batteries must be shipped with a ground shipping method.
We are excited to introduce the Nitro Nectar Gold Series HV Lipo Battery Series! They use a different battery packaging technology that provides a better discharging rate for those who like to push the limit! We tested these batteries with our powerhouse 1S craft, the AcroBee BeeBrain BL BNF and they are built to keep up with the demand of raw thrust! After 3 months testing, we are now ready to bring them to the market for whoop pilots across the world!
Lightweight, durable and plenty of power to bring home the Gold!
If you want to run a larger 1s battery, you can solder two pigtails to your drone in parallel and run two of these batteries at once for 600mAh 1s! Please be careful when soldering two pigtails and check your work.
NOTE: These packs are designed to deliver a major amount of power! With the discharge rate that gives these packs such power, you will feel pack sag much later than normal packs. We suggest setting the low voltage reading to 3.5v per cell and bringing it in to land at 3.3v per cell. You are able to fly below 3.3v but that may result in battery degradation.
These are excellent whoop packs, likely the best. Ok, These are the best. Size, weight, performance...great value and quality.
J
Joey Whitaker
Great Batteries
These are the best whoop batteries I’ve ever used IMO. Very little voltage sag on high Kv whoops They are a little bigger than a regular 300mah whoop battery so they fit pretty snug but that’s a good thing. Will buy more.
L
LaQuaunn Suggs
Awesome
Awesome batteries. They hold a charge very well. Lots of pop!
Good flier, handles the abuse a new flier like me has put it through
First prebuild from NBD. I swapped out the tracer RX for crossfire, initially had a no gyro flag on the AIO but was able to get it sorted with NBD support. Flying it is a good time and it’s held up well to some decent crashes. So far only thing(s) I’ve needed to replace has been a propeller and a M3x20 standoff. Took me too long to notice but the 2 aluminum pieces are for taking the O3 air unit from 25x25 mounting and making it 20x20.