Put the minis in a jumper t lite. Love it. Needed small a sim controller.
D
David Sierocki
Amazing
Buttery smooth, amazing gimbals
T
T. Franks
SUPER EASY TO INSTALL
I had my TX12 for a few months before changing the stock gimballs because I didn't think I could swap them out as a newbie. I was wrong. This was so easy to do. Unscrew 4 (or 6? can't remember exactly) screws in the TX12, open the backing, pull 2 plug cables at each gimbal, unscrew 4 more screws, drop new gimbal in, screw 4 screws, plug two wires in, do same to other gimbal, and replace screws on back of TX. Job takes less than 20 minutes and you have amazingly smooth, stronger feeling gimbals. You have to screw in one screw on the gimbals itself to release the throttle stick so it doesn't self center. This was an EASY job.
C
Carlos Tovar
RadioMaster AG01-Mini Zorro & TX12 CNC Hall Gimbal - Set
Great addition to a great little budget radio! Can't ask for more! Would def recommend!
Unlike my previous experience with the acrobee65 that showed up inoperable, and they failed to replace, I took the insurance out on this because Newbee isn’t known for quality or customer service. I also ordered the ultra naked air unit just for this drone because the under performance of the acrobee75 with full-size air unit was a huge disappointment. The combination of ultra naked o3 and Savagebee is very nice. Park cruising I could get close to 5 minutes of flight time. More aggressive flying will lower that, but the power to weight ratio is nice. The problem with this configuration lies is the o3 cage provided being brittle, and when the cheap material breaks, it makes the o3 unit very vulnerable. After a couple days, I decided it wasn’t worth the lose, so I took out the ultra naked and installed the normal o3. The weight definitely brings down the experience. Handling and flight times are cut. It’s still a fun craft, but it hurts to know how much better it could be with a stronger o3 cage.
The pros: responsive, fast, easy set up,
The cons: low quality materials used for 03 cages
I would only recommend buying this if you have access to a 3d printer. If not, they’re going to nickel and dime their customers with these cages. If you have a 3d printer or a durable o3 cage that will fit, this is a must have. I’ve been using the remaining acrobee75 cages, and I like them. It puts the props in view and condenses the center of mass.