Want to experience the efficiency, long range and low latency of the ELRS protocol without purchasing a new radio? RadioMaster has you covered!
Featuring up to 1W output, F-1000Hz refresh rates and a high-efficiency cooling system, the Ranger Micro 2.4GHz ELRS Module represents the cutting edge in ELRS technology. Attach the module to a compatible radio (RadioMasterZorro and more) to enjoy all that ELRS has to offer.
The included T-shape antenna is designed for maximum signal coverage. An optional MOXON antenna is available for directional applications.
*Note: The Ranger Nano 2.4GHz ELRS Module fits Nano module bays, for JR style/Micro connectors, please consider the Ranger and theRanger Micro modules.
Features
High-efficiency cooling system
Wifi and Bluetooth support
Packet rates up to F-1000Hz
Up to 1Watt Power output
T-antenna included
With the Nano connector, support Zorro radio
Specification
Item: Ranger Nano Module
Regulatory Domain: ISM2400
MCU: ESP32(main), ESP8285(aux,as ESP backpack)
RF chip: SX1281IMLTRT
Frequency Range: 2400 MHz - 2480 MHz
Maximum packet rate: 500Hz/F-1000Hz (F-1000Hz mode requires EgdeTX 2.7.1 or later)
Minimum receiver refresh rate: 25Hz
RF Output Power: 30dBm for FCC, 20dBm for CE (Adjustable by LUA)
Dimension: 136*42*26mm (with T antenna) / 74*42*26mm (without antenna)
Size
Ranger Series
We wish to thank the ExpressLRS team for their support and testing during the development of the Ranger series. To learn more and support the ExpressLRS project visit https://www.expresslrs.org/
Ranger 2.4GHz ELRS Module
Ranger Micro 2.4GHZ ELRS Module
Ranger Nano 2.4GHZ ELRS Module
2.4GHz T Antenna
2.4GHz Moxon Antenna
Package Includes
1 * Ranger Nano Module
1 * T Antenna
Need receivers too? Purchase the Ranger Nano Combo, which includes the following items:
This item does not work with my Radio Master TX16S transmitter. In fact it will not physically even plug into the back of my transmitter as they said it would. So no I am going to have to send it back and try again.
Unlike my previous experience with the acrobee65 that showed up inoperable, and they failed to replace, I took the insurance out on this because Newbee isn’t known for quality or customer service. I also ordered the ultra naked air unit just for this drone because the under performance of the acrobee75 with full-size air unit was a huge disappointment. The combination of ultra naked o3 and Savagebee is very nice. Park cruising I could get close to 5 minutes of flight time. More aggressive flying will lower that, but the power to weight ratio is nice. The problem with this configuration lies is the o3 cage provided being brittle, and when the cheap material breaks, it makes the o3 unit very vulnerable. After a couple days, I decided it wasn’t worth the lose, so I took out the ultra naked and installed the normal o3. The weight definitely brings down the experience. Handling and flight times are cut. It’s still a fun craft, but it hurts to know how much better it could be with a stronger o3 cage.
The pros: responsive, fast, easy set up,
The cons: low quality materials used for 03 cages
I would only recommend buying this if you have access to a 3d printer. If not, they’re going to nickel and dime their customers with these cages. If you have a 3d printer or a durable o3 cage that will fit, this is a must have. I’ve been using the remaining acrobee75 cages, and I like them. It puts the props in view and condenses the center of mass.