Transmitting power: Internal 4-in-1 multi-protocol module : Max 100mw (protocol dependent); Internal ELRS : Max 250mw (transmitting power is adjustable)
EdgeTX is installed by default (Touch screen enabled).
* Requires EdgeTX version 2.6.0 or OpenTX version 2.3.15 or later.
Available in 4in1 and ELRS versions
Optional V4.0 Hall Gimbals
Standard version with V4.0 Hall Gimbals, same chipset as the AG01, optimized hall sensor circuitry, improves center point positioning and temperature stability. Stick travel, self-centering and stick tension are now externally adjustable.
Flat & Raised Grips Included
Both the raised and flat versions of the rear grips are included allowing you to customize the feel of your TX16s MKII right out of the box.
Built-in dual speakers
External Module Bay
The TX16s natively supports Team Black Sheep MicroTX modules in CRSFmode with LUA scripts. Best of all the TX16s Internal 4-in-1 Multi-protocol module allows you to keep the MicroTX installed and switch between internal RF and Crossfire via software, no more module swapping.
Upgraded Design
Retooled faceplate with improved fit and finish
Improved S1/S2 knobs with center detents
4.3” IPS Color Display - The TX16s features a bright and clear 4.3-inch IPS color display for easy and convenient model setup and operation with adjustable brightness to suit all conditions.
Improved LS/RS Sliders with smoother feel and better centre-detents.
New 3.5mm Audio jack - Rear mounted audio jack minimizes RF interference from external modules and adds headphone audio feature.
I am kinda new to fpv drone flying but not new to RC and this radio is by far the best I’ve used. Definitely complicated and has a lot to lean but its loaded with features and is fully customizable and way more advanced then anything Ive used before. Coming from the Spektrum platform YouTube is your friend as there is a lot to learn.
Unlike my previous experience with the acrobee65 that showed up inoperable, and they failed to replace, I took the insurance out on this because Newbee isn’t known for quality or customer service. I also ordered the ultra naked air unit just for this drone because the under performance of the acrobee75 with full-size air unit was a huge disappointment. The combination of ultra naked o3 and Savagebee is very nice. Park cruising I could get close to 5 minutes of flight time. More aggressive flying will lower that, but the power to weight ratio is nice. The problem with this configuration lies is the o3 cage provided being brittle, and when the cheap material breaks, it makes the o3 unit very vulnerable. After a couple days, I decided it wasn’t worth the lose, so I took out the ultra naked and installed the normal o3. The weight definitely brings down the experience. Handling and flight times are cut. It’s still a fun craft, but it hurts to know how much better it could be with a stronger o3 cage.
The pros: responsive, fast, easy set up,
The cons: low quality materials used for 03 cages
I would only recommend buying this if you have access to a 3d printer. If not, they’re going to nickel and dime their customers with these cages. If you have a 3d printer or a durable o3 cage that will fit, this is a must have. I’ve been using the remaining acrobee75 cages, and I like them. It puts the props in view and condenses the center of mass.