【High Performance】- CNHL 3S lipo battery 11.1V 650mAh with 70C discharge rate hardcase offers you very high power and very long run time lipo battery for FPV, DRONE,BABYHAWK,tinyhawk, Drone Kit, RTF. They are widely fit Multi Rotor FPV from Size 90 to 180 Torrent 110 Lizard 95 Warbirds Eflite Blade Brushless Micro Drone FPV Racing Drone
【Application】 - CNHL 650mah 3s Lipo battery Suitable for RC Airplane, RC Helicopter, RC Car/Truck/boat，Glider ,ARRMA, Associated, Axial, Duratrax, Losi,Ofna,Traxxas,Vaterra, etc(Only if the voltage, dimension and the plug match, then it will fit).
【Voltage Note】- Please check whether the battery surface is alright when you get it and whether the voltage is between 3.7~4.2V before using.
【What you get】- CNHL 11.1V 70C 650mAh 3S Lipo Battery with XT30 Plug. After-sales Service: Every CNHL Product has 30 Days Money Back Guarantee & 12 Months Warranty. Please contact us immediately if you have any problems with our product( enter into "Your Orders" for help or send email to our after-sales mailbox), we will reply you within 24 hours.
Right away, this is the best 65mm Whoop I know. Not even close.
I ordered two, one is more or less stock, just the PEEK motor screws and V3 cockroach. The second is upgraded to 0702 27000kV but will go back because I like the 25000kV more because of smoother throttle response and perfect betaflight tune.
Now the but:
1. On both quads I had to replace the BeeEye for a spare one because both are out of focus.
2. the yellow props were way too loose and very brittle. I lost two on my maiden. Black, blue and red are very tight (too tight for such a fragile prop) but if you get them on without bending them, they will last.
3. why does the quad not come with the lighter frame right away?
4. PH2.0…. You know the drill.
On that price point, even after the frame and PEEK upgrade I can forgive these quality issues. Especially considering the great tune and quality FC and motors. But be sure to order a replacement cam and props right away.
This was kind of a late night lark. I'd seen this upgrade for the Mk3 for a while and pondered whether it was a gimmick or not, and I'm pleased to say it's a genuinely good upgrade. It has reduced the noise of my Mk3 considerably. I haven't noted any significant increase in print quality, but the old drone of the bed is gone and that's completely worth it.
![[pre-order]BetaFPV A03 400mW 5.8G VTX](http://newbeedrone.com/cdn/shop/files/8c6db81bad1f7fab20f937b5a3deb50b_720x_2e752615-4a65-4c95-a2d8-df964bdc15b6_{width}x.webp?v=1700635982)
![[pre-order]BetaFPV Aquila16 FPV Kit](http://newbeedrone.com/cdn/shop/files/2_720x_f35023be-a70b-48e4-97c5-277987d855e7_{width}x.webp?v=1700619059)
![[pre-order]BetaFPV Moxon Radio Transmitter Antenna V2 (1pcs)](http://newbeedrone.com/cdn/shop/files/MOXON2.4_720x_aa23e915-1266-4875-bf6e-91bd353c6047_{width}x.webp?v=1700537807)
