V5+® is an advanced autopilot designed by CUAV® and the PX4 team and manufactured by CUAV. It is based on the Pixhawk FMUv5 design standard and is perfectly compatible withPX4andArduPilotfirmware.
Previous
Next
Faster F765 processor
V5+ selects the STM32F765 processor with better performance. Its main frequency is up to 216MHZ and it contains 2MB FLASH/512K RAM. The clock speed is higher, the RAM is larger, and the speed will be greatly improved.
New FMUv5 hardware design
V5+ is a high-performance flight control system created by CUAV based on FMUv5 open source hardware. It has a more advanced processor than FMUv3, a larger FLASH and RAM, and a more stable and reliable sensor.
Support RTK centimeter positioning
V5+ supports RTK positioning module to achieve accurate centimeter positioning to meet your higher positioning requirements. (RTK positioning module needs to be purchased separately)
PX4 official standard
CUAV is a premium member of Dronecode and has been working to promote the PX4 open source project. The V5+ interface is designed according to the official PX4 standard to ensure compatibility and interoperability with hardware and software products in the PX4 ecosystem.
Multi-sensor redundancy combination
Built-in 5 sets of sensors, the flight controller monitors the multi-channel sensor data in real time, and performs redundant switching immediately after the failure, improving flight safety and stability.
Specifications /V5+ flight controller
Hardware parameter
Main processor
STM32F765 (32 Bit Arm® Cortex®-M7, 216MHz, 2MB flash, 512KB RAM)
Coprocessor
STM32F100 (32 Bit Arm® Cortex®-M3, 24MHz, 8KB SRAM)
sensor
Accelerometer
ICM-20602/ICM-20689/BMI055
Gyro
ICM-20602/ICM-20689/BMI055
Electronic compass
IST8310
Barometer
MS5611
External interface
UART serial port
5
I2C
4
SPI
1
CAN
2
ADC
2
PWM output
8-14 PWM outputs (6 from IO, 8 from FMU)
DSM/SBUS/RSSI
1
PPM IN
1
CAN buses
2
Analog inputs for voltage/current
2
GPS&Safety
1
Debug/F7 SWD interface
1
USB interface
1(Type-C)
TF slot
1
Related interface protocol
PPM IN
PPM
DSM/SBUS
DSM/SBUS;RSSI:PWM/3.3v analog voltage
GPS
NMEA/UBLOX
Support model
PX4 and Ardupilot firmware
Copter/Plane/Helicopter/VTOL/unmanned vehicle/Rover, etc.
Right away, this is the best 65mm Whoop I know. Not even close.
I ordered two, one is more or less stock, just the PEEK motor screws and V3 cockroach. The second is upgraded to 0702 27000kV but will go back because I like the 25000kV more because of smoother throttle response and perfect betaflight tune.
Now the but:
1. On both quads I had to replace the BeeEye for a spare one because both are out of focus.
2. the yellow props were way too loose and very brittle. I lost two on my maiden. Black, blue and red are very tight (too tight for such a fragile prop) but if you get them on without bending them, they will last.
3. why does the quad not come with the lighter frame right away?
4. PH2.0…. You know the drill.
On that price point, even after the frame and PEEK upgrade I can forgive these quality issues. Especially considering the great tune and quality FC and motors. But be sure to order a replacement cam and props right away.
This was kind of a late night lark. I'd seen this upgrade for the Mk3 for a while and pondered whether it was a gimmick or not, and I'm pleased to say it's a genuinely good upgrade. It has reduced the noise of my Mk3 considerably. I haven't noted any significant increase in print quality, but the old drone of the bed is gone and that's completely worth it.
when i received mine the box and everything was not damaged but when i opened it the canopy was cracked and the VTX did not work when i tried my first battery. I'm alright with the vtx being DOA as all i really wanted was the motors and beeeye camara, But when i reached out to customer service i was blamed for crashing it (even tho i never flew it). beware the QC is total garbage. save your money and buy a Mobula6 from a reputable company like GetFPV for RDQ's. I wasn't going to write a review but after the email i received i don't want anyone else getting scammed.
I had a very personable experience shopping with my drone your team took the time to help me purchase exactly what I and also identified the additional accessories that I may need to purchase that way I would not have post purchase regret. I will definitely be shopping there again for more flight systems and accessories.
