Designed to be the best all-around neck strap on the market, period. Not too long, not too short, the right buckle, not too fancy. Comfortable, easy to use. in the distinctive Ethix green.
****Please note that the clasp on this is TOO BIG for the Gforce balancer.****
Just got it in today. the pad is way too small IMO, and its been stitched in place to stop it from moving, which would be great except its stitched about 3" off center. so I have to adjust the strap way out of center to fix it. the pad is small and not that soft on my skin. at least it wasn't expensive....
M
Mr. DP
Comfortable
W
WillsFPV
Best neck strap!!
Beats all FrSky neck straps that have no comfort. Won’t look for any other after this purchase!
R
Robert Nadeau
Ethix Radio Lanyard
I disagree with the review claiming that the strap is flimsy. Far from it, this strap is made using a weave reminiscent of automotive safety belts.
The neck pad isn't particularly useful, and it tends to slide around, so I put a dot of hot melt glue on each edge of it to hold it in place. I have no regrets with this purchase.
Right away, this is the best 65mm Whoop I know. Not even close.
I ordered two, one is more or less stock, just the PEEK motor screws and V3 cockroach. The second is upgraded to 0702 27000kV but will go back because I like the 25000kV more because of smoother throttle response and perfect betaflight tune.
Now the but:
1. On both quads I had to replace the BeeEye for a spare one because both are out of focus.
2. the yellow props were way too loose and very brittle. I lost two on my maiden. Black, blue and red are very tight (too tight for such a fragile prop) but if you get them on without bending them, they will last.
3. why does the quad not come with the lighter frame right away?
4. PH2.0…. You know the drill.
On that price point, even after the frame and PEEK upgrade I can forgive these quality issues. Especially considering the great tune and quality FC and motors. But be sure to order a replacement cam and props right away.
This was kind of a late night lark. I'd seen this upgrade for the Mk3 for a while and pondered whether it was a gimmick or not, and I'm pleased to say it's a genuinely good upgrade. It has reduced the noise of my Mk3 considerably. I haven't noted any significant increase in print quality, but the old drone of the bed is gone and that's completely worth it.
0
![[pre-order]BetaFPV A03 400mW 5.8G VTX](http://newbeedrone.com/cdn/shop/files/8c6db81bad1f7fab20f937b5a3deb50b_720x_2e752615-4a65-4c95-a2d8-df964bdc15b6_{width}x.webp?v=1700635982)
![[pre-order]BetaFPV Aquila16 FPV Kit](http://newbeedrone.com/cdn/shop/files/2_720x_f35023be-a70b-48e4-97c5-277987d855e7_{width}x.webp?v=1700619059)
![[pre-order]BetaFPV Moxon Radio Transmitter Antenna V2 (1pcs)](http://newbeedrone.com/cdn/shop/files/MOXON2.4_720x_aa23e915-1266-4875-bf6e-91bd353c6047_{width}x.webp?v=1700537807)