Unbelievable performance with unbelievable value. Best racer whoop just got better again. At $89.99, there is no brushless whoop with this quality in the market.
Compared to Hummingbird V2, now with built-in VTX. Special X-shaped board with F4 processor, built-in 25mW video transmission, SPI ELRS receiver, and LEDs. Plug-and-play everything. Completely no soldering. Easy fast fixes when parts break.
We found the best ratio between the size of drone and its weight distribution. Extra weight-saving from true all-in-one board. X-shaped board to save un-needed weight at corners. Compared to V2, we saved 1.3 grams. Total weight up to 23.31grams. Approximately 2 minutes 40 seconds with Nitro Nectar 300mAh batteries racing at insane fast speed.
We believe in good chaos in this world. Add a little surprise and color in your life. If you REALLY don't like the color, you can always get replacement and choose a new color when you break the frame with our unlimited frame warranty.
Designed to be 100% compatible with Nitro Nectar Gold for best performance. Super smooth and longer-lasting flights.
0802 25000kv Motors - Super high kv for fast speed. 3-blade Azi propellors - Developed with engineering theory for optimal air-grab and stability.
Our support team in the United States are here to help. US customers enjoy Unlimited Frame Warranty from our site. For more info, visit here. For other countries, please ask your local store to see if they offer replacement.
Every machine or instruments needs tuning to get optimal performance. Same goes for drones. This bird is all ready to go right out of the box.
SPI ELRS3.0 receiver (Binding instruction: power on the drone, push the bind button under the flight controller to get into bind mode. If your remote control is not ELRS3.0 or above version. You will need to update your remote controller ELRS to 3.0 version because betaflight 4.4 will no longer support any lower version of 3.0) Please read through the SPI base information if you have difficulty with binding
This drone has been carefully crafted using only newbeedrone parts. It is important to note that any use of non-compatible parts from other brands may result in technical difficulties. Additionally, should you choose to modify the drone, it is crucial that you assume full responsibility for any resulting issues. It is not advisable to proceed with modifications without the necessary knowledge and expertise. We appreciate your understanding and cooperation in ensuring the safe operation of the drone.
If you mess up the setting?
The stock firmware comes with all settings, including PID tune data. If you change anything and feel that it does not perform as well as the original settings, you can reset it in Betaflight under the Setup tab to bring it back to the factory default.
Binding procedure:
To bind, connect to USB power or a battery source. Push the bind button on the front bottom of the flight controller to trigger the binding mode. Bind it to your radio controller. (Note: The Hummingbird v3 only supports ELRS 3.0 or a later version. If your remote controller is ELRS 2.5, you will need to update your ELRS TX Module.)
I have the AcroBee, the AcroBeeV3, and now the ELRS Hummingbird V3 and the Hummingbird is the best so far. With ELRS range and penetration is no problem but at VTX of only 25mw is a little challenging but still enjoyable. Had a binding problem but Support told me to up the ELRS packet rate to 250Hz and that worked... lowered it to 150Hz after initial binding and also flys well. Thanks again for a great little quad at an amazing price that will make me purchase another for a spare.
S
Stephen Chin
Hummingbird V3 BNF
I go the pink drone, nice. Overall this whoop flies well, and it comes with extra cockroach v3 which is a bonus at this whoop price, camera quality is decent and can improve for better quality.
J
John Kelley
Hummingbird V3 BNF (Now with FREE extra Cockroach V3!)
