Our popular Boxer radio is now available in transparent version - a stunning blend of style and performance that is sure to catch the attention of the RC community! Unleash the perfect balance of stylish design and high durability, all wrapped in premium transparent packaging. Get ready to be captivated by the extra white LED kit that comes with it, allowing you to further customize the look of your radio! We even included an extra neckband to make the whole set stylish and comfortable!
Features
Special transparent radio with white gimbal LED kit and RadioMaster neckband You can DIY your personalized and unique radio at any time Equipped with a built-in ExpressLRS RF module Equipped with the powerful STM32F407VGT6 with 1MB Flash and 192KB RAM Pre-installed EdgeTX firmware Internal ELRS module with 1,000Hz refresh rate Adjustable ELRS RF output (30dBm FCC max or 20dBm EU LBT max.) QC3.0 fast charge supports 2.0A MAX Compact design with excellent ergonomics New low-profile latching SE switches and transient SF switches Oversized battery compartment - holds 2S 6200mAh battery pack for up to 20 hours of battery life (without battery) Comes standard with a full-size V4.0 Hall head that can be upgraded to an AG01 CNC Hall head Standard JR module compartment Internal cooling fan of built-in module (ELRS version) RadioMaster standardizes button layout Versatile 6-position switch for accessing airplane modes Adjustable, detachable T-antenna Industry-first fabric handle for increased portability Replaceable, ergonomic grip Redesigned SD card slot with pre-installed SD card External module power supply slot on battery cover RadioMaster's signature carrying case and gimbal protector come standard to ensure your radio stays safe while on the move.
Specification
Item No.: BOXER Radio Transparent Version Size: 235*178*77mm Weight: 532.5 grams Frequency: 2.400GHz-2.480GHz Internal RF: ELRS 2.4GHz Supported protocols: Module dependent Transmit power: ExpressLRS: Max 30dBm (international) / Max 20dBm (EU LBT) Cooling fan: Built-in (ELRS version) Voltage range: 6.6-8.4V DC Radio firmware: EdgeTX (transmitter) / ELRS (radio frequency module) Channels: Up to 16 channels (depending on receiver) Battery: 7.4V 2-cell Li-polymer battery / Two x 3.7V 18650 Li-ion batteries (without battery) Display: 128*64 monochrome LCD display Gimbal: Standard high-precision 4.0 Hall gimbal (AG01 optional) External modules: JR/FrSKY/Crossfire compatible Upgrade method: USB/SD card and EdgeTX Companion PC software Giveaway: White gimbal LED kit included but not installed Bonus: Radiomaster neckband
Related products
Boxer radio controller 2S 7.4V 6200mAh lithium battery AG01 CNC Hall gimbal new color
Package includes:
1 * BOXER radio transparent version 1 * Signed suitcase 1*T-type antenna 1 * USB-C cable 1 * Universal joint protector 1*1.5mm Allen wrench 2 * M4*4 screws 4 * Low tension spring 1 * Sticker 1 * Manual 1 * White gimbal LED set (ready for immediate installation) 1*18650 Battery Tray (without battery) 1* RadioMaster transmitter neckband
Right away, this is the best 65mm Whoop I know. Not even close.
I ordered two, one is more or less stock, just the PEEK motor screws and V3 cockroach. The second is upgraded to 0702 27000kV but will go back because I like the 25000kV more because of smoother throttle response and perfect betaflight tune.
Now the but:
1. On both quads I had to replace the BeeEye for a spare one because both are out of focus.
2. the yellow props were way too loose and very brittle. I lost two on my maiden. Black, blue and red are very tight (too tight for such a fragile prop) but if you get them on without bending them, they will last.
3. why does the quad not come with the lighter frame right away?
4. PH2.0…. You know the drill.
On that price point, even after the frame and PEEK upgrade I can forgive these quality issues. Especially considering the great tune and quality FC and motors. But be sure to order a replacement cam and props right away.
This was kind of a late night lark. I'd seen this upgrade for the Mk3 for a while and pondered whether it was a gimmick or not, and I'm pleased to say it's a genuinely good upgrade. It has reduced the noise of my Mk3 considerably. I haven't noted any significant increase in print quality, but the old drone of the bed is gone and that's completely worth it.
![[pre-order]BetaFPV A03 400mW 5.8G VTX](http://newbeedrone.com/cdn/shop/files/8c6db81bad1f7fab20f937b5a3deb50b_720x_2e752615-4a65-4c95-a2d8-df964bdc15b6_{width}x.webp?v=1700635982)
![[pre-order]BetaFPV Aquila16 FPV Kit](http://newbeedrone.com/cdn/shop/files/2_720x_f35023be-a70b-48e4-97c5-277987d855e7_{width}x.webp?v=1700619059)
![[pre-order]BetaFPV Moxon Radio Transmitter Antenna V2 (1pcs)](http://newbeedrone.com/cdn/shop/files/MOXON2.4_720x_aa23e915-1266-4875-bf6e-91bd353c6047_{width}x.webp?v=1700537807)
