Using the Speedy Bee App to set the Remote control function, you can start/stop recording through the remote control. For example, you can bind the recording function to the ARM mode, and the DVR will start recording when the ARM mode is activated. Otherwise, the DVR will stop recording.
Select theAssociate pin, and then connect the PIN you selected to the H/L pad of the RunCam DVR-S.
SelectAssociate mode, we can choose any mode. For example, if you want to start recording after the drone is arming, stop recording after disarming, you can select ARM mode.
Associate action, when the assocated mode is actived, RunCam DVR-S will perform this action. In general, this setting does not need to be changed.
ClickBind and Reboot.
Method 2. Manual association
Open the App (iOS >= 1.0.8, Android >= 1.0.7)=> select the Help Center=>click RunCam DVR-S => select Telemerty Control
Select yourFlight ControllerandRunCam DVR-S.
Select theAssociate pin, and then connect the PIN you selected to the H/L pad of the RunCam DVR-S.
SelectAssociate mode, we can choose any mode. For example, if you want to start recording after the drone is arming, stop recording after disarming, you can select ARM mode.
Associate action, when the assocated mode is actived，RunCam DVR-S will perform this action. In general, this setting does not need to be changed.
ClickGenerate CLI Commands.
Copy the commands and enter the commands on the CLI interface of ground station.
they have a nice grippy slightly rounded top for thumbers, which I have always been, but they are also scalloped with 2 different radius for hybrid pinchers which I have wanted to use but never felt comfortable with until now. I think I am switching thanks to these sticks. fits my AG01 perfectly.
I bought it for longer flights with 6s motors, so that I can have more control and smoothness for cinematic stuff. I haven’t tested it to it’s limits because I don’t have any 5” quads with motors over 1960kv so I can’t take advantage of the C-rating the way a 4S motor would, but it has held up for me.
Stout boy. Lots of room for electronics and room for the new elrs gemini chip. I look forward to building this out and sending her Loooooong Range on MountaineerFPV on Youtube
1x DVR
1x Set of M2 screws
1x SD card protector
1x 3pin FPV Silicone Cable(Male)
1x 3pin FPV Silicone Cable(Female)
1x Manual
![[pre-order] SpeedyBee 5.8 GHz Antenna V2 SMA](http://newbeedrone.com/cdn/shop/files/1000-9__56467_{width}x.jpg?v=1695705569)
![[pre-order] HDZero Freestyle V2 Kit](http://newbeedrone.com/cdn/shop/files/all_{width}x.png?v=1694509846)
