QuadrAnt™ for Yuneec H520E with H850-RTK Drone Range Extender Directional Antenna Set
The QuadrAnt™ by WirEng® is a high gain directional antenna set dedicated to significantly extend your Yuneec H520E controlled by the H850-RTK controller, for significantly increased range, reliability, operational stability, battery life, and invulnerability from external interferences.
The QuadrAnt™ by WirEng® can also be used in mission-critical situations where RF interferences may cause losing control of your Yuneec H520E, or simply when your H850-RTK operating range is not enough to satisfy your purposes.
The QuadrAnt™ by WirEng® is splash proof and can therefore be used on boats and under severe weather conditions such as heavy rain, snow, etc. The primary purpose of the QuadrAnt™ by WirEng® is to significantly increase your H850-RTK reach, however, the QuadrAnt™ is also recommended to stabilize your Yuneec H520Eoperation because it will provide your H520Ewith a very strong and reliable signal at any height, inclination, and operating distance, with possibly a longer battery life as an added benefit, since the drone's transmitter won't have to operate at maximum transmit power when far away.
The QuadrAnt™ by WirEng® is truly compatible with your H850-RTK controller, because it supports all of its frequencies and modes of operation, which we carefully verified with the manufacturer's specifications. This QuadrAnt™set is made for the Yuneec H520Eand H850-RTK controller, so if your drone-controller combination is different, please search our store for the correct combination, or contact us here for assistance.
The QuadrAnt™ by WirEng® comes with WirEng® extended 2-year warranty. Utility and Design Patents pending.
Main Features
The QuadrAnt™ replaces the two small H850-RTKantennas with four powerful WirEng® antennas with enhanced directivity and gain due to WirEng®'s MixPol™ technology, without the need of any controller modification (manufacturer warranty will not be voided).
Provided cables (if chosen) will connect directly to the H850-RTK controller.
The QuadrAnt™ fully supports the H850-RTK Automatic Frequency Hops (AFH) on all bands required by the H850-RTK and H520E.
The QuadrAnt™ fully supports Frequency Hopping Spread Spectrum (FHSS) modality featured by the H850-RTK and H520E.
The QuadrAnt™ fully supports the anti-jamming frequency hopping technology offered by both the H850-RTK and H520E.
The QuadrAnt™ will increases the H850-RTK reach, obtaining longer distances and increased stability and reliability for controlling the Yuneec H520E.
All H850-RTKcontrollerand H520E drone bands are supported by careful verification with Yuneec technical specifications.
* The QuadrAnt™ will also enhance your YuneecH520E controlled by the H850-RTK controller operational reliability and stability.
The QuadrAnt™ will also likely enhance battery life, since the drone won't have to transmit at maximum power when far away from the controller.
The QuadrAnt™ includes 100% marine-grade stainless steel arm and reflector, made to withstand mission-critical situation and every possible weather condition.
Each QuadrAnt™ component is categorized as semi industrial grade (anti-UV ABS, splash-proof, and stainless steel hardware)
Each QuadrAnt™ element has a 24K gold plated N-Connector on its radome.
The QuadrAnt™ has an extended operating temperature of -25° to +85° C, for use in virtually any possible environment and weather condition.
The QuadrAnt™ has has a high input/output power of up to 250 W continuous, 350 W peak (more than many times what's usually needed).
The QuadrAnt™ is strong and durable, for use even in difficult situations and environments.
The QuadrAnt™ has an IP67 rating (protected against dust, strong water jets, and water waves).
The QuadrAnt™ has a UL94 V-0 flammability rating
The QuadrAnt™ has USA and International trademarks current, and utilities and design patents pending.
Buy with confidence, the QuadrAnt™ comes with WirEng®'s extended two-year all-encompassing manufacturer warranty!
Good flier, handles the abuse a new flier like me has put it through
First prebuild from NBD. I swapped out the tracer RX for crossfire, initially had a no gyro flag on the AIO but was able to get it sorted with NBD support. Flying it is a good time and it’s held up well to some decent crashes. So far only thing(s) I’ve needed to replace has been a propeller and a M3x20 standoff. Took me too long to notice but the 2 aluminum pieces are for taking the O3 air unit from 25x25 mounting and making it 20x20.