The NewBeeDrone FLOW 1102 Motors fill the gap between 0802 and 1202 motors. It brings extra power to the Acrobee75 and MosquitoXL Frame. If you need to carry an HD System on both of the frame, this motor is a good option for the setup.
Specifications:
- 3.47g w/ wire
- Titanium Alloy TC4 Shaft
- NSK Ball Bearing
- 0.2mm Silicon Steel Sheets Core
- 50mm cable length with JST1.0 Plug to work with all BeeBrainBL Flight Controller
- 7075 Aluminum Alloy
- 10000KV for 2S battery / 19000KV for 1S battery
- 1.5mm shaft
- Whoop motor mount that can fit in with all Cockroach Frame and the Mosquito frame.
We used these motors on a 2s custom frame build using NBD FC, camera, and props. The drone weights 50 grams with payload and without battery. These motors have hours of use and show no sign of wear. With the help of these motors, we earned 1st in capture-the-flag and 2nd in head-to-head in a recent Drones in School competition.
A
Alexander Cormia
Great choice for toothpick builds or heavy lift whoops
3 hole mount works with 65mm 75mm and both iterations of the mosquito frames. Ball bearings for smooth movement and efficiency, 10,000 kv works well for 2s 65mm applications, or 19,000kv for a 75mm whoop build, even can carry a small action cam!
At first I have a relatively low flight time with my Meteor65 Pro. Then I decided to lighten the Pro. I think because the motors (smaller) have a lower current draw the Nitro Nector Golds are really shining. It is at least comparable to a lot of other packs I have. So the capacity is definitely great, just don’t use them in a high current environment and they will work very well.
For tiny whoop racing, I prefer this motor with the hummingbird guts (AIO camera and canopy) on the 65pro frame with 4-blade 35mm props. Close to 20g, phenomenal run time.
Some people at the racetrack (and CIOTTI) call this an "old school" motor.
I usually make my own 180 degree power pigtail, but BETAFPV designed the perfect pigtail for a fair price, had to buy them... I usually don't like BETAFPV BT2.0 pigtail wires, the silicon is high quality, but where you solder the wire right next to the wire is where it always breaks, I don't expect this to change :-(
I would recommend these excellent BT2.0 Cable Pigtails :-))))