Unbelievable performance with unbelievable value. Best racer whoop just got better again. At $89.99, there is no brushless whoop with this quality in the market.
Compared to Hummingbird V2, now with built-in VTX. Special X-shaped board with F4 processor, built-in 25mW video transmission, SPI ELRS receiver, and LEDs. Plug-and-play everything. Completely no soldering. Easy fast fixes when parts break.
We found the best ratio between the size of drone and its weight distribution. Extra weight-saving from true all-in-one board. X-shaped board to save un-needed weight at corners. Compared to V2, we saved 1.3 grams. Total weight up to 23.31grams. Up to 4 minutes with Nitro Nectar 300mAh batteries racing at insane fast speed.
We believe in good chaos in this world. Add a little surprise and color in your life. If you REALLY don't like the color, you can always get replacement and choose a new color when you break the frame with our unlimited frame warranty.
Designed to be 100% compatible with Nitro Nectar Gold for best performance. Super smooth and longer-lasting flights.
0802 25000kv Motors - Super high kv for fast speed. 3-blade Azi propellors - Developed with engineering theory for optimal air-grab and stability.
Our support team in the United States are here to help. US customers enjoy Unlimited Frame Warranty from our site. For more info, visit here. For other countries, please ask your local store to see if they offer replacement.
Every machine or instruments needs tuning to get optimal performance. Same goes for drones. This bird is all ready to go right out of the box.
SPI ELRS3.0 receiver (Binding instruction: power on the drone, push the bind button under the flight controller to get into bind mode. If your remote control is not ELRS3.0 or above version. You will need to update your remote controller ELRS to 3.0 version because betaflight 4.4 will no longer support any lower version of 3.0) Please read through the SPI base information if you have difficulty with binding
This drone has been carefully crafted using only newbeedrone parts. It is important to note that any use of non-compatible parts from other brands may result in technical difficulties. Additionally, should you choose to modify the drone, it is crucial that you assume full responsibility for any resulting issues. It is not advisable to proceed with modifications without the necessary knowledge and expertise. We appreciate your understanding and cooperation in ensuring the safe operation of the drone.
If you mess up the setting?
The stock firmware comes with all settings, including PID tune data. If you change anything and feel that it does not perform as well as the original settings, you can reset it in Betaflight under the Setup tab to bring it back to the factory default.
Binding procedure:
To bind, connect to USB power or a battery source. Push the bind button on the front bottom of the flight controller to trigger the binding mode. Bind it to your radio controller. (Note: The Hummingbird v3 only supports ELRS 3.0 or a later version. If your remote controller is ELRS 2.5, you will need to update your ELRS TX Module.)
I've been away for a few years, and wanted to purchase an "updated" whoop. I am sooooo glad I chose the Hummingbird V3! The tune on this was spot on, and this thing just flies so good!! Going to grab a couple more just have have around now!
K
Kenny Ey
Defective Drone
Received the hummingbird V3 1 month after originally placing the order that show instock. After two battery packs, Motor 3 stopped working. Oscilloscope showed defective mossfett. Newbeedrone customer service is horrible, slow and wants to "evaluate" before replacing. Cheap made FC and many reviews showing VTX failures as well as others. Recommend going with something else such as the Mobula 6
J
Justin B
What a waste.
After sorting out the osd issues the vtx died with only around 20 packs through it.
J
Jose
Great customer support
Bought this hummingbird 2 weeks ago and now during a flight it falls from the sky and says “rx loss fail safe”. I bought one and loved it so much that I bought this second one. I reached out to support so I’ll have to wait and see what they say.
Update: after sending them a video and doing all troubleshooting they asked me to do, I had to send the hummingbird back to them so they can test it themselves. Turns out they replaced the flight controler for me and sent it back to me. Thanks newbedrone for awesome service. Will update this review if anything else comes up. Thanks again NBD.
M
Mykola L
So far so good! 🛸
This is my first fpv. Just starting to fly.
All feels great.
Additional big thanks to the neewbeedrone team and the person who packed my parcel for the candy! 😅
Good flier, handles the abuse a new flier like me has put it through
First prebuild from NBD. I swapped out the tracer RX for crossfire, initially had a no gyro flag on the AIO but was able to get it sorted with NBD support. Flying it is a good time and it’s held up well to some decent crashes. So far only thing(s) I’ve needed to replace has been a propeller and a M3x20 standoff. Took me too long to notice but the 2 aluminum pieces are for taking the O3 air unit from 25x25 mounting and making it 20x20.