VIFLY GPS-Mate Fixes Satellites without Flight Pack Power
Most drone pilots have a problem when using the GPS on their drones. GPS modules are slow, and get interference. To get a fix, a pilot must wait many minutes for a GPS fix. To do this, everything must be powered, which drains the battery and causes extra interference. It also has potential risk to cause overheating issues to your quad components. In addition, when you finish a flight cycle and change the quad battery, the GPS needs to get a hot-start fix as the quad battery disconnected. We want to fix the pain, so we design and produce GPS-mate, the external power module just for GPS.
What can GPS-mate do?
VIFLY GPS-mate is an external power module just for GPS, there is a switch to turn on and off the unit. With this device, once the pilot wants to fly, he flips the switch and only the GPS gets powered. When the GPS fix finished, the pilot connects the drone LiPo. The drone LiPo powers the drone, and recharges the GPS battery. The GPS never loses power until the switch is turned off, so the pilot never needs to get another fix for the whole session.
We also embed VIFLY Finder 2 function into this device, it can work as a standard buzzer that controlled via your radio when the quad battery is connected, it also can work as a standalone buzzer that help you find the lost drone when the main battery has been ejected.
I use this for my 4" and 7" LR builds. I have never had to use it. But I have tested it and it works as expected.
C
Carlos Tovar
VIFLY GPS-Mate with Built in Battery
An absolute must for anybody flying with a GPS. Will make you lock onto more satellites and at record time. Please put these in your long-range birds now!
S
Saverio Avella
Must Have if you’re using a GPS
Easy to install and a genius piece of kit, and it works great.
Saves you time and battery life, but most important it gets you off flying with a GPS fix in no time at all.
Still building it, but this sucker gets five stars for completeness. Seems to have a double supply of screws and standoffs, plus it comes with a full set of TPU bits—antenna mount, xt30 mount, a little sled for the receiver, and shoes—that you won’t get from cncdrones.
These batteries might actually be worth it in terms of dollars per flight time! They last over five minutes when my old lower end batteries last three minutes, and they’ve even lasted for seven on a freestyle quad in a tight environment. Plus it’s always fun to have a battery that can actually kind of handle full throttle for extended periods!
I tried to be cheap and find crappy clones of all these tools... it's not cheaper, it's very expensive to buy just a prop wrench, just a m3 nylock wrench and buying hex drivers and wire strippers. It totalled me 90$. This ethix toolkit was cheaper and got me exactly what I wanted and needed for my drone kit
![[pre-order] HDZero Freestyle V2 Kit](http://newbeedrone.com/cdn/shop/files/all_{width}x.png?v=1694509846)
![[pre-order] HDZero Freestyle V2 VTX](http://newbeedrone.com/cdn/shop/files/a_{width}x.png?v=1694509689)
![[pre-order] BETAFPV 2S Battery Charger and Voltage Tester BT3.0---9/30](http://newbeedrone.com/cdn/shop/files/BT3.0_720x_ba2e2544-fb0f-4599-a3ab-4c3e1209d0d4_{width}x.webp?v=1694154470)
