DroneAnt-Plus™ for Yuneec Typhoon H with ST16 Controller High Gain Drone Range Extender Octa-Element Omnidirectional/Directional Antenna Set
The DroneAnt-Plus™ by WirEng® is the ultimate ultra-high gain, directional/omnidirectional antenna dedicated to drastically extending your Yuneec Typhoon H controlled by the Yuneec ST16 controller, for drastically increased range, reliability, operational stability, and invulnerability from external interferences.
The DroneAnt-Plus™ by WirEng® can also be used in mission-critical situations where RF interferences may cause losing control of your Yuneec Typhoon H, or simply when your Yuneec ST16 operating range is not enough to satisfy your purposes.
The DroneAnt-Plus™ by WirEng® is splash proof and can therefore be used on boats and under severe weather conditions such as heavy rain, snow, etc. The primary purpose of the DroneAnt-Plus™ by WirEng® is to drastically increase your Yuneec ST16 reach, however, the DroneAnt-Plus™ is also recommended to stabilize your Yuneec Typhoon Hoperation because it will provide your Typhoon Hwith a very strong and reliable signal at any height, inclination, and operating distance.
The DroneAnt-Plus™ by WirEng® can be assembled as omni-directional (i.e., four antenna pairs 90 degrees apart from each other), bi-directional (two arbitrary directions as per your needs, with two pairs for each direction), or fully directional (all four pairs in one direction). This flexibility makes the DroneAnt-Plus™ a great investment to assure your Yuneec Typhoon H increased distance and operational reliability at all times.
The DroneAnt-Plus™ by WirEng® is truly compatible with your Yuneec ST16 controller, because it supports all of its frequencies and modes of operation, including polarization, bandwidth, and concurrent multi-frequency transceiver bidirectionally, which we carefully verified with Yuneec. This DroneAnt-Plus™set is made for the Yuneec Typhoon Hand Yuneec ST16, so if your drone-controller combination is different, please search our store for the correct combination, or contact us here for assistance.
The DroneAnt-Plus™ by WirEng® comes with WirEng® extended 2-year warranty. Utility and Design Patents pending.
Main Features
The DroneAnt-Plus™ replaces the two small Yuneec ST16antennas with eight powerful WirEng® antennas, orientable for omnidirectional, semi-directional, and fully directional radiation patterns, without the need of any controller modification, so the Yuneec warranty will still be valid.
Provided cables (if chosen) will connect directly to the Yuneec ST16 controller (via a short strain-relief adapter).
The DroneAnt-Plus™ will increases the Yuneec ST16 reach, obtaining longer distances and increased stability and reliability for controlling the Yuneec Typhoon H.
All Yuneec ST16controllerand Typhoon H drone bands are supported by careful verification with Yuneec's technical specifications.
The DroneAnt-Plus™ will also enhance your Yuneec Typhoon Hcontrolled by the Yuneec ST16 controller operational reliability and stability.
The DroneAnt-Plus™ will also possibly save battery power because the Typhoon H transceiver won't have to boost its trasmission power to its maximum to reach the Yuneec ST16, thanks for the signal gain that the DroneAnt-Plus™ provides.
Each of the eight DroneAnt-Plus™ antennas have stainless steel back shield and stainless steel hardware, and each of the four holding arms are made of marine grade stainless steel.
Each DroneAnt-Plus™ element is categorized as semi industrial grade (anti-UV ABS and IP-67 splash-proof).
Each DroneAnt-Plus™ element has a 24K gold plated N-Connector on its radome, for added reliability and maximum power transfer.
The DroneAnt-Plus™ has an extended operating temperature of -25° to +85° C, for use in virtually any possible environment and weather condition.
The DroneAnt-Plus™ has has a high input/output power of up to 250 W continuous, 350 W peak (more than one hundred times what's usually needed).
The DroneAnt-Plus™ is strong and durable, and it's intended for use even in difficult situations and environments.
The DroneAnt-Plus™ has an IP67 rating (protected against dust, strong water jets, and water waves).
The DroneAnt-Plus™ has a UL94 V-0 flammability rating
The DroneAnt-Plus™ has USA and International trademarks current, and utilities and design patents pending.
You can buy from us with confidence, the DroneAnt-Plus™ comes with WirEng®'s extended two-year all-encompassing manufacturer warranty, and we're a WirEng® officially authorized distributor.
Good flier, handles the abuse a new flier like me has put it through
First prebuild from NBD. I swapped out the tracer RX for crossfire, initially had a no gyro flag on the AIO but was able to get it sorted with NBD support. Flying it is a good time and it’s held up well to some decent crashes. So far only thing(s) I’ve needed to replace has been a propeller and a M3x20 standoff. Took me too long to notice but the 2 aluminum pieces are for taking the O3 air unit from 25x25 mounting and making it 20x20.