NewBeeDrone & MuteFPV Ultimate Soldering Practice Board
Our practice soldering board isn't like the rest. This board comes with every single type of surface you may solder to when building a drone. Practice soldering your XT60 or XT30 wire to a surface pad and to a through hole! Practice soldering signal wires to pads from large to small and through holes.
The NewBeeDrone Practice Soldering Board is also two sided for the most bang for your buck. On the top are pads sized for signal wires and on the back are pads for ESC and battery connections.
We highly suggest picking up a practice soldering board before building for the first time. It's easy to make a mistake and making it on a practice board is safe and costs nothing.
"Thank you so much MuteFPV for designing this solder practice board. It's our honor to work with you on this project and make a co-brand product with you!"
At first I have a relatively low flight time with my Meteor65 Pro. Then I decided to lighten the Pro. I think because the motors (smaller) have a lower current draw the Nitro Nector Golds are really shining. It is at least comparable to a lot of other packs I have. So the capacity is definitely great, just don’t use them in a high current environment and they will work very well.
For tiny whoop racing, I prefer this motor with the hummingbird guts (AIO camera and canopy) on the 65pro frame with 4-blade 35mm props. Close to 20g, phenomenal run time.
Some people at the racetrack (and CIOTTI) call this an "old school" motor.
I usually make my own 180 degree power pigtail, but BETAFPV designed the perfect pigtail for a fair price, had to buy them... I usually don't like BETAFPV BT2.0 pigtail wires, the silicon is high quality, but where you solder the wire right next to the wire is where it always breaks, I don't expect this to change :-(
I would recommend these excellent BT2.0 Cable Pigtails :-))))