The ATOMRC Flying Fish a 650mm wing span dual motor FPV capable glider. All electronics/servos/motors come pre-installed so you can get flying quickly. The Flying Fish comes with some included FPV camera mounts should you wish to add camera + VTX gear. This plane is suitable for beginners or intermediate users as it can be flown fast with aerobatics or slower if you are learning.
The specs is testing by PNP version： Recommend take off weight: 250g Max. take off weight: 280g Cruse speed：20km/h
Feature: 1. The flying fish is classic mid/low speed FPV glider. 2. Compact size(only 650 wingspan), swift and durable, easy for beginners. 3. The special designed 2 in 1 ESC and VTX made the electronics wiring clean. 4. Come with PNP/FPV version, all part is installed, no need glue or soldering anymore. 5. Sub 250g design, made the glider fly without regulation, also easy to fly in the park and small area.
Flying Fish PNP+S Package Included: 1 x Pre-build plane 1 x ATOMRC Exceed 2in1 BLS 10A ESC (Bulid in 5V BEC,Input 2~4s.) 2 x1105 4000KV Motor 4x 4.3G Digital Servo 4 x 3016-3 Propeller
Flying Fish FPV+S Package Included: 1 x PNP Plane 1 x ATOMRC TX500 VTX 1 x Foxeer Razer Nano 1200TVL 14mm CAM 1 x 5.8G Antenna
Right away, this is the best 65mm Whoop I know. Not even close.
I ordered two, one is more or less stock, just the PEEK motor screws and V3 cockroach. The second is upgraded to 0702 27000kV but will go back because I like the 25000kV more because of smoother throttle response and perfect betaflight tune.
Now the but:
1. On both quads I had to replace the BeeEye for a spare one because both are out of focus.
2. the yellow props were way too loose and very brittle. I lost two on my maiden. Black, blue and red are very tight (too tight for such a fragile prop) but if you get them on without bending them, they will last.
3. why does the quad not come with the lighter frame right away?
4. PH2.0…. You know the drill.
On that price point, even after the frame and PEEK upgrade I can forgive these quality issues. Especially considering the great tune and quality FC and motors. But be sure to order a replacement cam and props right away.
This was kind of a late night lark. I'd seen this upgrade for the Mk3 for a while and pondered whether it was a gimmick or not, and I'm pleased to say it's a genuinely good upgrade. It has reduced the noise of my Mk3 considerably. I haven't noted any significant increase in print quality, but the old drone of the bed is gone and that's completely worth it.
