Get slippery with NewBeeDrone Smoov Lube. Apply this lube to your brushless whoop motors to keep the bushings nice and smooth!
To use, apply 1-2 drops to each the top and bottom bushing. Access the top bushing through the holes of the bell and the bottom bushing underneath the C-clip.
I didn't have any difficulties with the motors, but the reviews say it works, I use it for prevention
A
Alexander Cormia
Must have! Magic 0802 reviving juice!
My multiple sets of 0802 motors have some that are prone to buzzing and squeaking at times. The bushings are good, but not as good a ball bearings, but on something so tiny, it had to be done. This oil really helps lubricate the bushings and helps them spin smoothly. Definitely notice a difference and brings ones I thought were dead back to life! Obviously works for any size motors, I have used on my 0804, 1102 and 1202.5s also with good results 👍🏻
J
Jake
Smoov Motor Oil
A squeak no more! Flushed out any dirt or grime that previous was making a high-pitched noise during flight.
At first I have a relatively low flight time with my Meteor65 Pro. Then I decided to lighten the Pro. I think because the motors (smaller) have a lower current draw the Nitro Nector Golds are really shining. It is at least comparable to a lot of other packs I have. So the capacity is definitely great, just don’t use them in a high current environment and they will work very well.
For tiny whoop racing, I prefer this motor with the hummingbird guts (AIO camera and canopy) on the 65pro frame with 4-blade 35mm props. Close to 20g, phenomenal run time.
Some people at the racetrack (and CIOTTI) call this an "old school" motor.
I usually make my own 180 degree power pigtail, but BETAFPV designed the perfect pigtail for a fair price, had to buy them... I usually don't like BETAFPV BT2.0 pigtail wires, the silicon is high quality, but where you solder the wire right next to the wire is where it always breaks, I don't expect this to change :-(
I would recommend these excellent BT2.0 Cable Pigtails :-))))