Unbelievable performance with unbelievable value. Best racer whoop just got better again. At $89.99, there is no brushless whoop with this quality in the market.
Compared to Hummingbird V2, now with built-in VTX. Special X-shaped board with F4 processor, built-in 25mW video transmission, SPI ELRS receiver, and LEDs. Plug-and-play everything. Completely no soldering. Easy fast fixes when parts break.
We found the best ratio between the size of drone and its weight distribution. Extra weight-saving from true all-in-one board. X-shaped board to save un-needed weight at corners. Compared to V2, we saved 1.3 grams. Total weight up to 23.31grams. Up to 4 minutes with Nitro Nectar 300mAh batteries racing at insane fast speed.
We believe in good chaos in this world. Add a little surprise and color in your life. If you REALLY don't like the color, you can always get replacement and choose a new color when you break the frame with our unlimited frame warranty.
Designed to be 100% compatible with Nitro Nectar Gold for best performance. Super smooth and longer-lasting flights.
0802 25000kv Motors - Super high kv for fast speed. 3-blade Azi propellors - Developed with engineering theory for optimal air-grab and stability.
Our support team in the United States are here to help. US customers enjoy Unlimited Frame Warranty from our site. For more info, visit here. For other countries, please ask your local store to see if they offer replacement.
Every machine or instruments needs tuning to get optimal performance. Same goes for drones. This bird is all ready to go right out of the box.
SPI ELRS3.0 receiver (Binding instruction: power on the drone, push the bind button under the flight controller to get into bind mode. If your remote control is not ELRS3.0 or above version. You will need to update your remote controller ELRS to 3.0 version because betaflight 4.4 will no longer support any lower version of 3.0) Please read through the SPI base information if you have difficulty with binding
This drone has been carefully crafted using only newbeedrone parts. It is important to note that any use of non-compatible parts from other brands may result in technical difficulties. Additionally, should you choose to modify the drone, it is crucial that you assume full responsibility for any resulting issues. It is not advisable to proceed with modifications without the necessary knowledge and expertise. We appreciate your understanding and cooperation in ensuring the safe operation of the drone.
If you mess up the setting?
The stock firmware comes with all settings, including PID tune data. If you change anything and feel that it does not perform as well as the original settings, you can reset it in Betaflight under the Setup tab to bring it back to the factory default.
Binding procedure:
To bind, connect to USB power or a battery source. Push the bind button on the front bottom of the flight controller to trigger the binding mode. Bind it to your radio controller. (Note: The Hummingbird v3 only supports ELRS 3.0 or a later version. If your remote controller is ELRS 2.5, you will need to update your ELRS TX Module.)
Flies nice enough but I guess I’m used to thrashing my tinyhawk3 at a playground. One pretty average bang while flying around under my piano broke the frame in 3 places. I was baffled at how it took so much damage. The warranty is still pretty expensive when you consider shipping. We’ll see how the replacement goes.
A
Andrew Wilson
Hummingbird V3 BNF
E
Earl Bollinger
Nice little quad
It is a pretty nice little quadcopter. I had no difficulty getting mine bound and setup.
R
Roberto Camacho
Love it!!!!!
I' e had all of the hummingbirds including the brushed ones and the V3 is best one so far!!!!
A
Andreas
Great Quad, but…
Right away, this is the best 65mm Whoop I know. Not even close.
I ordered two, one is more or less stock, just the PEEK motor screws and V3 cockroach. The second is upgraded to 0702 27000kV but will go back because I like the 25000kV more because of smoother throttle response and perfect betaflight tune.
Now the but:
1. On both quads I had to replace the BeeEye for a spare one because both are out of focus.
2. the yellow props were way too loose and very brittle. I lost two on my maiden. Black, blue and red are very tight (too tight for such a fragile prop) but if you get them on without bending them, they will last.
3. why does the quad not come with the lighter frame right away?
4. PH2.0…. You know the drill.
On that price point, even after the frame and PEEK upgrade I can forgive these quality issues. Especially considering the great tune and quality FC and motors. But be sure to order a replacement cam and props right away.
Flies nice enough but I guess I’m used to thrashing my tinyhawk3 at a playground. One pretty average bang while flying around under my piano broke the frame in 3 places. I was baffled at how it took so much damage. The warranty is still pretty expensive when you consider shipping. We’ll see how the replacement goes.
