The AOS 7 EVO is a lightweight drone designed with low-vibration technology. This drone features state-of-the-art electronics and topology optimization. The AOS 7 EVO allows you to run less filtering, with less associated delay, and increase your PID gains far higher than any other frame in its weight class. Designed to match and even exceed the vibration performance of premium 5" frames this frame can deliver thrilling freestyle performance and long range cruising, the best of both worlds.
Highlights
DJI O3 HD Air Unit Low-Latency Digital Transmission
Topology-optimized truss design arms
2.5mm Top and Bottom Plates
Optimized Camera Protection
32x32 GoPro Mounting
Built by iFlight
Low Vibration
Specifications
Product Name:AOS 7 EVO V1.2 HD BNF
FC: BLITZ F722 FC
ESC: BLITZ E55 55A 4-IN-1 ESC
Video Transmission: DJI O3 Air Unit
Frame: 293mm wheelbase
Motor: XING 2806.5 motors
Prop: GemFan 7040 propellers
Takeoff Weight: Approx. 652g
Dimensions (L×W×H):284×228×34.5 mm
Max Speed:140 Km/h (Manual Mode)
Maximum Takeoff Altitude: 7000 m
Max Hover Time: Approx. 30 mins (With 6S 2P 8000mAh battery no load)
Max Wind Speed Resistance: Level 6
Operating Temperature Range:-10° to 40° C (14° to 104° F)
Antennas: Dual Antenna
GNSS: GPS+Galileo
Video Transmission
Product Name: DJI O3 Air Unit
Communication Bandwidth: Max 40 MHz
FOV (single screen): 155°
Communication Frequency: 2.400-2.4835 GHz (RX only) / 5.725-5.850 GHz (RX and TX)
End-to-End Latency
With DJI FPV Goggles V2:
810p/120fps Video Transmission Quality: The latency is lower than 28 ms.
810p/60fps Video Transmission Quality: The latency is lower than 40 ms.
With DJI Goggles 2:
1080p/100fps Video Transmission Quality: The latency is as low as 30 ms.
1080p/60fps Video Transmission Quality: The latency is as low as 40 ms.
Max Video Transmission Bitrate: 50 Mbps
Max Video Transmission Range: 10 km (FCC), 2 km (CE), 6 km (SRRC)
Operating Temperature Range: -10º to 40º C (14° to 104° F)
Power Input: 7.4-26.4 V
Audio Transmission: N/A
Packing List
1 x AOS 7 EVO V1.2 6S HD BNF
2 x Antennas
2 x Prop(Pairs)
Important
All iFlight BNFs are tested before shipment to guarantee the highest quality.
If you still encounter a problem after receiving your shipment, please immediately contact our iFlight customer support at www.iflightrc.freshdesk.com.
Note
1. iFlight products may be used for civilian purposes only and any direct or indirect use of iFlight products for or in connection with the following is prohibited:
(1)Any military combat purpose or military combat related use;
(2)Terrorist activities: The purchaser also shall require its customers or end users to comply with the foregoing requirements.
2. If party A has violated applicable export control or economic sanctions laws and regulations, Party B has the right to immediately suspend delivery of products to Party A or terminate relevant cooperation without any liability.
At first I have a relatively low flight time with my Meteor65 Pro. Then I decided to lighten the Pro. I think because the motors (smaller) have a lower current draw the Nitro Nector Golds are really shining. It is at least comparable to a lot of other packs I have. So the capacity is definitely great, just don’t use them in a high current environment and they will work very well.
For tiny whoop racing, I prefer this motor with the hummingbird guts (AIO camera and canopy) on the 65pro frame with 4-blade 35mm props. Close to 20g, phenomenal run time.
Some people at the racetrack (and CIOTTI) call this an "old school" motor.
I usually make my own 180 degree power pigtail, but BETAFPV designed the perfect pigtail for a fair price, had to buy them... I usually don't like BETAFPV BT2.0 pigtail wires, the silicon is high quality, but where you solder the wire right next to the wire is where it always breaks, I don't expect this to change :-(
I would recommend these excellent BT2.0 Cable Pigtails :-))))