NewBeeDrone AcroBee65 BLV4 BNF ELRS2.4G 27000KV

How to Video:
Internal ELRS Rx Firmware flashing:

Review Video: 



Flight Controller: BeeBrain BLv4 ELRS
MCU: STM32F411
VTX: Switchable output power from 5mw- 25mw(for Racing) - SmartMAX(SmartMax up to 400mw)  with BeeTX 5.8Ghz Antenna
ESC: 12A BLHeliS Pre-Flash with Bluejay 0.16 target: S-H-40 48kHz 
ESC Connector: JST-1.0 3Pin
OSD: NBD7456 Graphical OSD compatible with Betaflight OSD
Receiver: ELRS2.4 Diversity receiver(ESP32 compatible with wifi&bluetooth firmware update) 2.4G T-Antenna(Top) & 2.4G antenna with MHF3 Connector (bottom)
Flight Controller Weight: 6.5g(Include antennas and battery connector)
Flight Controller Size: Outer dimensions: 29x29x7.6mm
Flight Controller Holes: 25.5x25.5mm
Battery input: 1-2S (Preset only support 1S, 2S will need throttle cap at less 50%)
Uart2: Tx&Rx for ExpressLRS2.4G Receiver 
Uart1:  Tx&Rx free
Power Connector: NBD-PH2.0 connector

Motors: Flow 0802 27000kv 
Frame: Cockroach65 Brushless Frame Clear Purple 
Camera Mount: Goober Canopy Clear Purple 
Propeller: Azi Tri-blade 31mm 1.0 Clear Purple

Batteries not included. 

Recommend Battery:
Nitro Nectar Gold 300 mAh 1S PH2.0 
Nitro Nectar Gold 250 mAh 1S PH2.0

1. ELRS Receiver firmware can be found here. Vendor choose NewBeeDrone
2. BeeBrain blv4 ELRS Betaflight 4.4 firmware

All new firmware can be found on our Github Page

Note: Binding process. power up the drone 3 times, on the third time you plug in power, the ELRS Receiver will get into binding mode. We are still trying to work on the ELRS firmware and make it able to just click the boot button to get into bind mode. Will get this update in the near future. 
Check out the video below CiottiFPV show you how to get into bind mode. - Thanks bro for showing this. lol 

Customer Reviews

Based on 24 reviews
Rachel Lindner

U.S based company with no contract phone number… extremely overpriced for a 65mm whoop whose available options are limited to newbeedrone’s proprietary connectors. Vtx range is less than beta fpv 65 meteor pro in addition to it being an inferior quality. (Disclaimer) I paid more money so that I could have a US company that potentially could help me, if I needed… WRONG!! no contact phone number and they answer emails when they feel like it.
Customer service maybe the worst I’ve ever experienced! As of October 28, 2023 you’re paying for $100 for an all in one flight controller that comes with motors with such a high KV you can’t get 2 1/2 minute flight times! And if you can, I wouldn’t know as the second or third day I owned the Blv 4 Acrobee 65 Elrs soldering pad on the negative side of the board broke off… the Stock tuning is pretty good for the few flights I actually got to experience albeit, all less than three minutes. I do like the field of view, or at least the way the canopy sits on the frame where I can see my props.
All in all, waste of money for what you get… no customer support, I’m extremely dissatisfied. Motor build quality, really nice, cockroach frame is durable.
5 in 1 AIO fc___ trash, at least if your running 1s. I considered other 65 mm whoops on the market and after a little research realized that you pay $60 more to have less customer support than anything made or shipped from China which is horrible to say is an American. Beta FPV and happymodel have comparable drones that cost $60 less which if you put in to perspective that you can buy for 0802 motors for less than $60 to potentially change the KV to your own preference, if you were dissatisfied, or experimenting.
I feel ripped off by this company, and that’s my honest review at least until my situation gets rectified.

Andy Fullenwider
Caveat Emptor! Proprietary firmware and similar model names means easy brickin’.

Was really excited for this whoop. Got it in the mail. Brought it to work. Knew from past bricking experiences with NewBee whoops that I had to get the firmware from the product site on, so off I went. Downloaded the firmware for the whoop with the ELRS 3. Flashed the firmware and….. I figured out I got that firmware was from the wrong damn whoop page. The Hummingbird ELRS 3 that I downloaded wasn’t the right firmware. I was on a very similar product page, but not the exact right page.

These whops seem really solid and they look super fun. My problem with the whoop being bricked is 100% user error. My problem with the whoop though is that these these things are too dang easy to brick by selecting the wrong firmware. I’d love to play with one of these, but I think I’m done buying them.

Jeffrey Miller

The camera quality is subpar compared to other tiny whoops this size. Had to re-solder two motors after the first flight. It flies well though.

AcroBee65 BLV4

It would be nice if you shipped it with the ELRS 3.0.0 firmware aboard. My understanding is that pretty much all transmitters these days have ELRS 3 onboard.

Brian Hancock
Great Little Whoop

This drone is now my hands down absolute favorite. This little guy is super responsive and fun to fly not to mention fast. My only small grip is that I wish you could tilt the camera a bit more, that and the camera isn't the best but that's the same with almost all the little guys. The frame has held up to much use and abuse and just keeps going. I fly this guy more than my 5".