SPI ELRS receiver (Binding instruction: power on the drone, push the bind button under the flight controller to get into bind mode. If you get the firmware version of 4.3.1, it should comes with ELRS2.5 Version. If you get the firmware version of 4.4.x it will be ELRS3.0. Please make sure your remote controller ELRS version are match with the Receiver.
This drone has been carefully crafted using only newbeedrone parts. It is important to note that any use of non-compatible parts from other brands may result in technical difficulties. Additionally, should you choose to modify the drone, it is crucial that you assume full responsibility for any resulting issues. It is not advisable to proceed with modifications without the necessary knowledge and expertise. We appreciate your understanding and cooperation in ensuring the safe operation of the drone.
Got a great deal on a couple of these fun whoops as Christmas gifts for myself and son. These fly great and can take a beating, just what I was looking for. Now we just need someone to make and sell solid state batteries to get longer flights from these 1S birds.
A
Abdulla M Hussain
Flight time
I have purchased this item with 4 300 amp nitor battery from newbee drones however the flight is less than a minute, then i purchased another drone and same problem i dont know what is wrong
P
Pete Darr
Hummer
New to FPV but I really like the micro's. This quad has quality thru out. From the motors to the board. If you didn't buy one you're missing out.
A
Anonymous
Fun Drone
nice price which made the decision pretty easy. a lot of fun to bash around
R
RileyFPV
Decent but could be better
While this tiny whoop may not be the lightest or have the most powerful video transmitter, it has been a blast learning the basics of flying and a few tricks as a beginner. With that being said, I’ve ran into a few problems. The strength of the solder joints on the motor wires is questionable, one came undone in a small crash. Another aggravating issue was that the battery leads on my quad were very short, they needed to be bent extremely bent in order to connect the battery. After a few short weeks the ground cable came completely disconnected at the connector head. These problems were fixed relatively easily but it’s something to keep in mind if you’re getting started in the hobby. I broke the canopy in one mounting place on the third day of owning the drone but it has been holding up and the frame seems very resilient to damage.
At first I have a relatively low flight time with my Meteor65 Pro. Then I decided to lighten the Pro. I think because the motors (smaller) have a lower current draw the Nitro Nector Golds are really shining. It is at least comparable to a lot of other packs I have. So the capacity is definitely great, just don’t use them in a high current environment and they will work very well.
For tiny whoop racing, I prefer this motor with the hummingbird guts (AIO camera and canopy) on the 65pro frame with 4-blade 35mm props. Close to 20g, phenomenal run time.
Some people at the racetrack (and CIOTTI) call this an "old school" motor.
I usually make my own 180 degree power pigtail, but BETAFPV designed the perfect pigtail for a fair price, had to buy them... I usually don't like BETAFPV BT2.0 pigtail wires, the silicon is high quality, but where you solder the wire right next to the wire is where it always breaks, I don't expect this to change :-(
I would recommend these excellent BT2.0 Cable Pigtails :-))))